Oil & Fuel Small Loader for Ford 3000 Gas

[Soundguy]

I agree with FWJ.. untill you get to the HD front axle of the industrials.. or the units with solid axles and no radius beams ( not the 4000su ).. but maybee x400/x500.. etc.. .. a large HD loader won't be good for the tractor.. etc.

Cracks in the radius rods can be welded up... they just stabilized the front leaf axle to the tractor.. however I show the radius rod assy number as"

C7NN3405C ROD Rod Assy., Radius, Except 2310,3310 (Not Shown), Start Year: 08/01/1970

What part(s) are your numbers refering to? looks like you are showing a r/l number yes? Ok.. I see.. you are showing the power steering version of the radius rods. ididn't see where you had specified that you had PS on the tractor... Yep.. no rocket science there. just weld up and cracks you see.

soundguy

 

[Soundguy]

There is a 772A on uh.. that bad auction site that we can't post links to, right now...

Item number: 180229026579

Soundguy

 

[Egon]

Sondguy; That loader does look impressive; however, where I grew up the tractor would spend most of it's time in one place as soon as there were several feet of snow on the ground or a nice greasy clay with a uphill to navigate.

Or just getting into the manure around the bale dump!

 

[Soundguy]

I'm just answering the call for a loader that fits... specific suitability for a specific task is up to the user!

soundguy

Sondguy; That loader does look impressive; however, where I grew up the tractor would spend most of it's time in one place as soon as there were several feet of snow on the ground or a nice greasy clay with a uphill to navigate.

Or just getting into the manure around the bale dump!