Small Time

/ Small Time #1  

myjohndeere2022

New member
Joined
Mar 18, 2022
Messages
4
Tractor
4400 JD
Hi everyone ! Having an issue with my 4400 with a 430 loader on it , the loader doesn’t have any lift pressure up or down neither does the bucket , it seem to happen all of a sudden , it will go up and down but can’t lift anything , hydraulic level is good , any thoughts where I should start? Thanks
 
/ Small Time #2  
Has it ever worked properly? Start by making sure your three point control is not on the full lift position. If it's not adjusted properly that can cause loader slow down and lift weakness.
 
/ Small Time #3  
Usually there is a "3 point hitch control valve" located just behind your feet, under the seat. I've had that get urned by moving my foot around and it essentially shuts down the hydraulics.
 
/ Small Time #4  
That valve only controls flow to the 3 point..... won't have any affect on the loader. Unless the flow is totally reversed... which is probably not even possible
 
/ Small Time #6  
Is the hydraulic reservoir full? Also, check the filters. Nice tractor when you get it running right. Gas or diesel?
 

Marketplace Items

2017 CATERPILLAR 262D SKID STEER (A62129)
2017 CATERPILLAR...
Abaco Machines DVL500 Vacuum Lifter (A61568)
Abaco Machines...
2017 Freightliner M2 106 AWD Terex Hi-Ranger 5TC-55 55ft Insulated Material Handling Bucket Truck (A60460)
2017 Freightliner...
2015 BOBCAT T770 SKID STEER (A62129)
2015 BOBCAT T770...
2025 Pabreak Auger Bits and Plate Skid Steer Attachment (A61567)
2025 Pabreak Auger...
2021 Ford F350 XL (A57148)
2021 Ford F350 XL...
 
Top