WilliamBos
Super Member
- Joined
- May 1, 2004
- Messages
- 5,354
- Location
- Innisfil, Ontario, Canada
- Tractor
- MF 1635 12x12 Powershuttle
Snowblower Smyth Snowblower
- Thread starter Duckklr69
- Start date
- Views: 7361
Spudland_Dave
Veteran Member
Actually, for a 60" the correct URL would be:
Smyth Welding - Snowblowers - Residential
The page says the "ribbon style auger flighting" is 1/2" thick, not the end plates....
Hopefully you're getting the 60-S and not the 60-LS....the "LS" model only has an 18" fan, which IMO is VERRRRYYYY Sub standard....wont blow much snow with an 18"er...
Snowblowers & Fan Tip speeds have been discussed in MANY threads here....bigger IS better..
Smyth Welding - Snowblowers - Residential
The page says the "ribbon style auger flighting" is 1/2" thick, not the end plates....
Hopefully you're getting the 60-S and not the 60-LS....the "LS" model only has an 18" fan, which IMO is VERRRRYYYY Sub standard....wont blow much snow with an 18"er...
Snowblowers & Fan Tip speeds have been discussed in MANY threads here....bigger IS better..
