Snow blower woes

[Ilikeurtractor]

Last but not least, I know that they sold a snow plow with the Bolen/Iseki models. Does anyone have the model numbers, or know which ones will fit a TX? Thanks!

Attached is a cross reference of Bolens attachments for their line-up of tractors. It's amazing all the variations and models of things they had and what crosses and what doesn't. Looking at it again, I messed up on my last post stating the single stage throwers were models 18000 when the one for the Iseki I have is actually a 17377 (according to the guide for the 3-cylinder tractors mine came on). I thinking the 18000s may actuallly take a CW input where the 17377 (and 1330) takes a CCW but I'm only guessing. Between Iseki and Bolens and all their different offerings it certainly is confusing even with the guide. They list the blades you're looking for. However, I adapted a John Deere 54" 4-way blade relatively easily to my Isekis so you may want to consider this since they are a lot more common from my experience.

[Edit] TBN only allows 1MB uploads for PDFs so I pulled the page that has the blades for the 2-cylinder Iseki TX tractors.

 

[amanda11270]

I have the actual Bolens/Iseki plow, its a full hydraulic, 54 inch size. It is definitely an attachment to acquire. I usually use just it, I just wanted this blower in case we ever got deep snow. As I have almost ran out of places to plow the snow to in the past and figured the blower would be able to throw it further over the piled snow someday when I actually need it.

Was kinda anticipating the snow this year since I did this, to get a chance to take it on a test drive.