Snowblower Hydraulics Question

[maubut]

I have a 2000 B2710 with a LA402 Loader. I recently hooked up my B2772 SnowBlower for the first time. I am having a difficult time figuring out what hoses go to what hookups on the loader hydraulic block. The loader hydraulic block has 4 fittings. Does anyone know which ones control what. I looked for it in my manuals but I was unable to find this info.

Thanks

 

[Gomer]

I have a B2630 and 2782 blower but should be the same. Inside 2(closest to the hood) are the up-down, two outside are left right chute rotator. Hope this helps.
Gomer

 

[leeds]

And to build on Gomer's reply, the lower hydraulic hose on the snowblower goes to the bottom fitting nearest the hood on the hydraulic control valve. In operation, you should be able to put the snowblower in the "float" position by throwing the hydraulic control lever all the way forward past the detent.

 

[maubut]

Thanks for the guidance I look forward to hooking it up properly.