ruglad03835
Silver Member
I'm going to remove the bucket and make it quick attach to the loader. If this turns out not to work I'll probably cut the blade down to 6'. Good luck. I'll post photo's once mine is finished.
Snowplow for Kubota 2910
- Thread starter cmhyland
- Start date
- Views: 3405
OP
cmhyland
Platinum Member
Rick,
You'll need a third valve to power angle the plow...
Are you going to use a diverter or run off rear remotes?
Regards,
Chris
You'll need a third valve to power angle the plow...
Are you going to use a diverter or run off rear remotes?
Regards,
Chris
ruglad03835
Silver Member
I'm going to add a Fasse Diverter valve; $330.00 from Deere.
It's going to be cheaper and a cleaner set up to do it that way rather than add a beyond kit and valve to the tractor.
It's going to be cheaper and a cleaner set up to do it that way rather than add a beyond kit and valve to the tractor.
Toolguy
Platinum Member
Thanks for the pics. Looks good so far. I'm interested to see how you attach the plow to the tractor. Are you making a subframe of some sort. Keep the pics coming. Thanks.
OP
cmhyland
Platinum Member
Toolguy,
I am making a subframe to go back to the loader frame.
Still working on the geometry for that...
Regards,
Chris
I am making a subframe to go back to the loader frame.
Still working on the geometry for that...
Regards,
Chris
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,518
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
You're looking good there. Anxious to see more, so good luck with the progress. Maybe we will get some snow to try it out on 'when' you are finished and ready. /forums/images/graemlins/wink.gif
Thanks for the pics.
Thanks for the pics.
OP
cmhyland
Platinum Member
Beenthere,
I just got in a little while ago.... Stopped and bought myself a mig welder.
I used a neighbors to get as far as I have but I wanted one for myself.
I picked up a Lincoln 3200HD... 135 amp DC mig welder.
So I should be able to make some good progress this weekend.
Regards,
Chris
I just got in a little while ago.... Stopped and bought myself a mig welder.
I used a neighbors to get as far as I have but I wanted one for myself.
I picked up a Lincoln 3200HD... 135 amp DC mig welder.
So I should be able to make some good progress this weekend.
Regards,
Chris
OP
cmhyland
Platinum Member
Update:
I picked up the steel for the frame on the tractor.
I'm using 2x2x1/4 inch angle stock.
I cut all the peices and bolted them in place.
I clamped the frame together and tacked it with the welder.
I removed the frame from the machine and proceeded
to do the final welds.
I picked up the 2X8 inch 2-way hydraulic cylinder
from TSC and had the hoses made up and added the
quick connects for the loader valve.
I have a few more peices to do this weekend and I'll
be close to done.
The final part of the project will be the angle cylinders.
I'll take some picks this weeked.
Regards,
Chris
I picked up the steel for the frame on the tractor.
I'm using 2x2x1/4 inch angle stock.
I cut all the peices and bolted them in place.
I clamped the frame together and tacked it with the welder.
I removed the frame from the machine and proceeded
to do the final welds.
I picked up the 2X8 inch 2-way hydraulic cylinder
from TSC and had the hoses made up and added the
quick connects for the loader valve.
I have a few more peices to do this weekend and I'll
be close to done.
The final part of the project will be the angle cylinders.
I'll take some picks this weeked.
Regards,
Chris