i can not figure out for the life of me what what kind of box blade and rm snow blower to get for my new l3240 or 3400 have not decided on the unit yet please through some ideas out there for me thanks a bunch
Box blade-6 footer would be appropriate,like a Woods GB72 or Landpride 2572? Rear snowblower,also a 6 footer,many brands available. Used could be a good option. Good Luck!
I'd be buying a power turn for it! Don't know what you might get for snow but if you look at a four blade impeller unit they normally blow better.
If you have a gravel drive run with the top link short so it runs on the heel.. If it is paved be sure that there is a cutting edge on the bottom and run the top link a little long!
For width's 72" works as a good width for both tools and an inch or two wider is still safe for operating.
I would love to have a RM Blower that faced forward myself. It doesn't appear that there any that would fit my BX25 but your tractor may be large enough for one. As mentioned, and manual chute would be a PITA.
