Source for odd size rocker switches?
- Thread starter Lil Foot
- Start date
- Views: 2739
OP
Lil Foot
Member
- Joined
- Mar 28, 2021
- Messages
- 28
- Tractor
- Kubota B7100DT
From everything I can tell, there are no switches available anymore that will fit correctly in the existing holes. Therefore I will pick new switches, and either make adapters to make new switches fit, (likely) or a new panel from scratch. (less likely)
The whole idea was to find switches that fit, so that I didn't have to invest a lot of time in this, because my time is not my own these days. If it was, a new machined aluminum, SS, & glass fabrication would be likely.
At some point, I will remove the broken plastic, and clean up the indicator lights and such, and cover with new plastic.
It don't have to be pretty, we ain't building a church here.
Thanks for all the input!
The whole idea was to find switches that fit, so that I didn't have to invest a lot of time in this, because my time is not my own these days. If it was, a new machined aluminum, SS, & glass fabrication would be likely.
At some point, I will remove the broken plastic, and clean up the indicator lights and such, and cover with new plastic.
It don't have to be pretty, we ain't building a church here.
Thanks for all the input!
Michael In Tennessee
Gold Member
Two ideas:
1) Get a regular rocker switch and see if it fits. That hole ain't too much bigger and it might fit just fine.
2)Nilight, and I presume others, has a thing called a switch holder that is basically a bezel for around a regular switch. You might need to enlarge the holes, but that is fairly easy.
1) Get a regular rocker switch and see if it fits. That hole ain't too much bigger and it might fit just fine.
2)Nilight, and I presume others, has a thing called a switch holder that is basically a bezel for around a regular switch. You might need to enlarge the holes, but that is fairly easy.
Captain Dirty
Platinum Member
It looks like there is still a little meat around the holes. How about a file, Dremel, or nibbler (rented, HD enough to handle 16 ga) to enlarge the holes to the next larger size switch you have found?
DaveMueller
Bronze Member
Maybe a 22x44mm hole?
www.carlingtech.com
L-Series Sealed, Snap-In Rocker Switches With Up to 12 Terminals
Laser etched, single or double pole sealed rocker switches with a variety of illumination options. Ratings of 15A 12V; 20A 12V; 15A 24V.
Zebrafive
Super Member
Switch adapters, if you room.
OP
Lil Foot
Member
- Joined
- Mar 28, 2021
- Messages
- 28
- Tractor
- Kubota B7100DT
Thread documenting my mini ex project:
www.orangetractortalks.com
Skip to post #98 for the switch related parts.
Hanix Mini Giant excavator?
My BIL recently got the long face from the doctor, and he is beginning to get his life in order. Pretty sad. One of the things he has to get rid of is a Hanix Mini Giant excavator. A few years ago I saw it, & I had never seen one like it (and I like the odd stuff) and told him I really liked it...
www.orangetractortalks.com
Skip to post #98 for the switch related parts.