OP
Spencer
Veteran Member
- Joined
- Jan 2, 2002
- Messages
- 1,267
- Location
- Western Michigan
- Tractor
- NH TC33D w/R4 Tires, Rear Remote, Hydraulic Toplink, 2 Auxiliary Work Lights, 7308 Loader w/Kasco Uni-Hitch (Quick Tach)
Spencer's Pole Barn Project
- Thread starter Spencer
- Start date
- Views: 69434
OP
Spencer
Veteran Member
- Joined
- Jan 2, 2002
- Messages
- 1,267
- Location
- Western Michigan
- Tractor
- NH TC33D w/R4 Tires, Rear Remote, Hydraulic Toplink, 2 Auxiliary Work Lights, 7308 Loader w/Kasco Uni-Hitch (Quick Tach)
OP
Spencer
Veteran Member
- Joined
- Jan 2, 2002
- Messages
- 1,267
- Location
- Western Michigan
- Tractor
- NH TC33D w/R4 Tires, Rear Remote, Hydraulic Toplink, 2 Auxiliary Work Lights, 7308 Loader w/Kasco Uni-Hitch (Quick Tach)
Re: Spencer\'s Pole Barn Project
I drilled a hole through the pole and put some 1/2" rebar through it. Then I lifted up on the rebar with my forks. The concrete I had poured around the base of the post was larger than the diameter up the top of the hole. That piece of rebar held up pretty well but I later had to switch to a piece of 1/2" pipe.
I drilled a hole through the pole and put some 1/2" rebar through it. Then I lifted up on the rebar with my forks. The concrete I had poured around the base of the post was larger than the diameter up the top of the hole. That piece of rebar held up pretty well but I later had to switch to a piece of 1/2" pipe.
Attachments
OP
Spencer
Veteran Member
- Joined
- Jan 2, 2002
- Messages
- 1,267
- Location
- Western Michigan
- Tractor
- NH TC33D w/R4 Tires, Rear Remote, Hydraulic Toplink, 2 Auxiliary Work Lights, 7308 Loader w/Kasco Uni-Hitch (Quick Tach)
OP
Spencer
Veteran Member
- Joined
- Jan 2, 2002
- Messages
- 1,267
- Location
- Western Michigan
- Tractor
- NH TC33D w/R4 Tires, Rear Remote, Hydraulic Toplink, 2 Auxiliary Work Lights, 7308 Loader w/Kasco Uni-Hitch (Quick Tach)
OP
Spencer
Veteran Member
- Joined
- Jan 2, 2002
- Messages
- 1,267
- Location
- Western Michigan
- Tractor
- NH TC33D w/R4 Tires, Rear Remote, Hydraulic Toplink, 2 Auxiliary Work Lights, 7308 Loader w/Kasco Uni-Hitch (Quick Tach)
OP
Spencer
Veteran Member
- Joined
- Jan 2, 2002
- Messages
- 1,267
- Location
- Western Michigan
- Tractor
- NH TC33D w/R4 Tires, Rear Remote, Hydraulic Toplink, 2 Auxiliary Work Lights, 7308 Loader w/Kasco Uni-Hitch (Quick Tach)
Inspector507
Super Member
Re: Spencer\'s Pole Barn Project
YEOUCH!!!!
YEOUCH!!!!
pajoube
Veteran Member
- Joined
- Oct 11, 2001
- Messages
- 2,225
- Location
- Montana (Near Bozeman)
- Tractor
- Former Owner PowerTrac 425 (September 2003)
Re: Spencer\'s Pole Barn Project
Never ridicule something that will happen to most of us.
Was very happy to see your post again but sure was sorry for the trouble you had to go through.
Now that the weather is starting to moderate you will be working again on the pole barn, we all are waiting for pictures of the progress.
PJ
Never ridicule something that will happen to most of us.
Was very happy to see your post again but sure was sorry for the trouble you had to go through.
Now that the weather is starting to moderate you will be working again on the pole barn, we all are waiting for pictures of the progress.
PJ
Phred
Veteran Member
Re: Spencer\'s Pole Barn Project
Sorry you had so much trouble,
Ridicule? I have done worse, and almost done much worse.
One day I was not paying attention to where I was going and almost put one of the forks through the side of my truck /forums/images/graemlins/blush.gif.
Stoped just in time. What a mess that would have been. The heavy duty set of forks would have gone right through the truck.
Fred
Sorry you had so much trouble,
Ridicule? I have done worse, and almost done much worse.
One day I was not paying attention to where I was going and almost put one of the forks through the side of my truck /forums/images/graemlins/blush.gif.
Stoped just in time. What a mess that would have been. The heavy duty set of forks would have gone right through the truck.
Fred