SSQA for CK20 ?

[oldpilgrim]

My brother has a CK20 and is interested in getting a SSQA setup for it. Does anyone have any idea where he could get the assembly that mounts on the FEL arms that would fit the CK20 ? The loader arms are pretty close together, it's a pretty small tractor so I don't even know if there is such a thing.

thanks

 

[George2615]

Give these guys a call and see if they have one for the CK20

W.R. Long Pin on Tractor Loader Bucket to Universal Quick Attach Converter, Adapter | Free UPS Ground Shipping for 1,000 miles!!

 

[EverythingAttachments]

For your tractor, ATI would by my choice for a quick attach adapter because it is lighter than the WR Long(87# vs around 120#)
The ATI is $965 shipped to your home, and WR Long is $837.
We sell WAAAY more WR Long adapters, but for smaller tractors, the ATI is preferred because it's lighter.

You will find them here:
ATI Quick Attach Adapter
WR Long Quick Attach Adapter

Let me know if you have any questions.
Travis

 

[Gil Case]

you can get a Semi QA from Michigan Iron for the ck20 for a couple of hundred bucks. I have one and it works very well. It does not require knocking the ears off the bucket and welding the QA on. I assume you can see it on their website or call Bob. They are banner advertiser here on TBN.
Error

 

[MichiganIron]

We have Universal Skid Steer tool carriers for the Kl120 Loader. The loader Tool Carrier, dual handle is $420.00 Weld Plates for the bucket conversion are $169.00 We have converted several KL120 Loaders to Universal Skid Steer.

 

[oldpilgrim]

thanks. I'll pass the info onto my brother.