Posthole Digger SSQA for L245DT with a 1200 Loader.

   / SSQA for L245DT with a 1200 Loader. #1  

2458n

Veteran Member
Joined
Mar 16, 2010
Messages
2,113
I have the need to purchase a piece from Kubota. Measurements of 37 5/8 outside and 33.5 inside. 1 inch pins on 9.5 inch centers. Where can I find the measurements on the internet?
 
   / SSQA for L245DT with a 1200 Loader. #2  
Need more info. Are you trying to use a hydraulic post hole digger on the SSQA or trying to convert the loader to SSQA?
 
   / SSQA for L245DT with a 1200 Loader.
  • Thread Starter
#3  
I would like to buy a ssqa for the 1200 loader. Measurement given is off my bucket ears. Would like to remove bucket and replace with a ssqa. I know there is something close available from Kubota. Nice day in Ohio - 72 degrees and nothing but sunshine. Farmers are spraying their cover crops and drilling in seedcorn today.
 
   / SSQA for L245DT with a 1200 Loader. #4  
First step would be to call your local dealer.

There are several aftermarket businesses that make a SSQA Adapter, this is one: Hay Farm Equipment | Skidsteer Attachments | Hay Spear Attachments


kubota_lb552_ss_03798.jpg


kubota_lb552_ss_03803.jpg
 
   / SSQA for L245DT with a 1200 Loader.
  • Thread Starter
#5  
Thank you for the Washburn info. Bought mine used 34 years ago at auction. From a John Deere guy. Replaced one water pump so far- no dealer really wants to waste time to take my money. Washburn has one close, will call tomorrow. They go down to 35 inches I need narrower. Thank you again for the info.
 
   / SSQA for L245DT with a 1200 Loader. #6  
You are welcome.

They can make it to fit your loader.
 
   / SSQA for L245DT with a 1200 Loader. #7  
First step would be to call your local dealer. There are several aftermarket businesses that make a SSQA Adapter, this is one: Hay Farm Equipment | Skidsteer Attachments | Hay Spear Attachments <img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=465503"/> <img src="http://www.tractorbynet.com/forums/attachment.php?attachmentid=465504"/>
I have one from them on my Ford 1920. It's nice and strong, but also heavy. I think mine weighs about 170 lbs. works great though. Mine is blue.

image-840463396.jpg
 
Last edited:
 

Tractor & Equipment Auctions

UNUSED MOWERKING SKID STEER AUGER SET (A50460)
UNUSED MOWERKING...
LINCOLN ELECTRIC VANTAGE 549 WELDER / GENERATOR (A50458)
LINCOLN ELECTRIC...
2015 CASE CX210D EXCAVATOR (A50458)
2015 CASE CX210D...
CHAMPION 240 GALLON AIR COMPRESSOR (A50460)
CHAMPION 240...
2017 JLG G5-18A Telehandler (A50490)
2017 JLG G5-18A...
2019 JOHN DEERE 325G SKID STEER (A50458)
2019 JOHN DEERE...
 
Top