starting at high RPM

   / starting at high RPM #1  

puternerd

New member
Joined
Aug 27, 2005
Messages
18
I started my BX 24 after only a few hours on it not realizing it had been moved to about 3/4 throttle. I feel terrible. It was that way for about 15 seconds before I got it backed down. I have been reading cautions in the manual about warmup and limiting the rpm during break in. There were no signs of harm but how bad could this have been on it?
 
   / starting at high RPM
  • Thread Starter
#2  
I started my BX 24 after only a few hours on it not realizing it had been moved to about 3/4 throttle. I feel terrible. It was that way for about 15 seconds before I got it backed down. I have been reading cautions in the manual about warmup and limiting the rpm during break in. There were no signs of harm but how bad could this have been on it?
 
   / starting at high RPM #3  
<font color="blue"> There were no signs of harm but how bad could this have been on it? </font>
It is never good to start a cold engine at a high RPM. It shouldn't have caused any damage, but I would make a practice of doing it.
 
   / starting at high RPM #4  
<font color="blue"> There were no signs of harm but how bad could this have been on it? </font>
It is never good to start a cold engine at a high RPM. It shouldn't have caused any damage, but I would make a practice of doing it.
 

Tractor & Equipment Auctions

2017 International ProStar Truck, VIN # 3HSDJAPR4HN677698 (A54865)
2017 International...
2025 Safety Basket Forklift Attachment (A55851)
2025 Safety Basket...
2015 Freightliner 122SD T/A Wet Kit Day Cab Truck Tractor (A55852)
2015 Freightliner...
2004 Ford F-250 (A53422)
2004 Ford F-250...
24" EXCAVATOR BUCKET (A52707)
24" EXCAVATOR...
1981 FRUEHAUF  CRUDE OIL TRAILER (A55745)
1981 FRUEHAUF...
 
Top