Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,889
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
:thumbsup:
Starting our new life
- Thread starter cat fever
- Start date
- Views: 103778
Otto Syracuse
Gold Member
Watch out for low bridges! Good Luck!!
OP
cat fever
Elite Member
Made it safely there. No heating issues on the truck. (So I guess it's good to power wash the radiators on a 20 year cycle. :laughing
On the steepest part of the canyon grade I was down to 25 mph with my throttle buried in the floor board. I have never towed anything that heavy before. I did own a 30' fifth wheel camp trailer that I towed a 2 place snow machine trailer with 2 ATV's on. Going triples was still no comparison to the PJ trailer and tractor. Having the ballast box on didn't help for sure, it's 1600 pounds alone. That is the last of the heavy pulling. I have two more trips with my 18' enclosed snow machine trailer and we should be done! Looking forward to that for sure.
As soon as possible after taking possession of the land we'll get the perc test done for the septic system and get a well driller scheduled. Pics to follow
On the steepest part of the canyon grade I was down to 25 mph with my throttle buried in the floor board. I have never towed anything that heavy before. I did own a 30' fifth wheel camp trailer that I towed a 2 place snow machine trailer with 2 ATV's on. Going triples was still no comparison to the PJ trailer and tractor. Having the ballast box on didn't help for sure, it's 1600 pounds alone. That is the last of the heavy pulling. I have two more trips with my 18' enclosed snow machine trailer and we should be done! Looking forward to that for sure.As soon as possible after taking possession of the land we'll get the perc test done for the septic system and get a well driller scheduled. Pics to follow
OP
cat fever
Elite Member
FYI
I did not explain myself in the last post; when I moved the hay, my truck overheated. I had to stop so it could cool down. When I got home I power washed the radiators for 10-15 minutes. That really helped, the heat gauge rode about 195 with full throttle most of the way up the grade. Truck alone it would be about 165-170.
I did not explain myself in the last post; when I moved the hay, my truck overheated. I had to stop so it could cool down. When I got home I power washed the radiators for 10-15 minutes. That really helped, the heat gauge rode about 195 with full throttle most of the way up the grade. Truck alone it would be about 165-170.
SirReal63
Platinum Member
Made it safely there. No heating issues on the truck. (So I guess it's good to power wash the radiators on a 20 year cycle. :laughing
As soon as possible after taking possession of the land we'll get the perc test done for the septic system and get a well driller scheduled. Pics to follow
It may be time to take the Cummins in for service (injectors and injection pump), it should have handled that load a little easier.
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 12,320
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
cat fever good luck with your new place.
I know that water can be hard to get in places up there,
I'm going to suggest something that will get some people talking have you
considered having a water dowser out to try and find the best place to drill for
water, some people don't believe in them and while I wouldn't put them at 100%
I have seen them right to many times to discount them.
I know that water can be hard to get in places up there,
I'm going to suggest something that will get some people talking have you
considered having a water dowser out to try and find the best place to drill for
water, some people don't believe in them and while I wouldn't put them at 100%
I have seen them right to many times to discount them.
