Starting

   / Starting #1  

bennie

New member
Joined
Mar 25, 2009
Messages
7
I have an LK 3054. When I turn the start for glow plug it heats up but when I turn to start nothing happens. Can anyone give me some advice. Battery is OK, cables terminal are clean. Thanks in advice.
 
   / Starting #2  
Welcome to TBN.
How do you know the battery is OK? Have you done a load test on it? If not, what tells you it is not the problem?Verify good clean solid ground at the frame/chassis, for the negative cable. Also make sure the battery post cable connections are unable to be moved without a wrench- ie. snug- tight. How old is the battery? How many hours on the clock?
Did the symptoms appear suddenly or over time, and now causing a no start condition?

To those more familiar with this model, is there a main fuse, 60 amps or similar? PTO lockouts? Neutral safety switches?. Etc?
TIA,

CM
 

Tractor & Equipment Auctions

Portable Restroom (A54865)
Portable Restroom...
Club Car Electric Utility Cart (A55851)
Club Car Electric...
INDUSTRIAS AMERICA F12T HYD TILT LAND LEVELER (A51406)
INDUSTRIAS AMERICA...
HITACHI EX550LC EXCAVATOR (A58214)
HITACHI EX550LC...
11' CONTAINER (A52706)
11' CONTAINER (A52706)
2017 Freightliner MT55 Step Van (A56858)
2017 Freightliner...
 
Top