troutsqueezer
Veteran Member
Been using RU for many years. Yup, it clogs the screen if you leave it in the sprayer too long. Spent a few hours troubleshooting that problem so it stuck in my brain (what's left of it).
Storing Roundup after mixing
- Thread starter hoytglagwell
- Start date
- Views: 24375
I have problems with it gelling too. I think it's the water ph or solids that contribute to it, so I don't store mixed RU anymore.
I also get gelling in my larger sprayer tip screens no matter how many times I rinse, so now I remove all tips and thoroughly wash/rise/dry them for storage after use. That's probably what I should have been doing all along anyway, and it sure saves time the next time I need to spray.
I also get gelling in my larger sprayer tip screens no matter how many times I rinse, so now I remove all tips and thoroughly wash/rise/dry them for storage after use. That's probably what I should have been doing all along anyway, and it sure saves time the next time I need to spray.
Pilot
Veteran Member
- Joined
- Nov 20, 2004
- Messages
- 1,224
- Location
- Oregon
- Tractor
- JD 770, Yanmar 180D, JD 420 (not running), had a Kubota B6200
No problems here. Our water has a very low pH and no minerals. Probably haven't left it in the sprayer more than about 6 weeks, but I have been using RU for over 20 years.
RalphVa
Super Member
- Joined
- Dec 19, 2003
- Messages
- 7,902
- Location
- Charlottesville, VA, USA
- Tractor
- JD 2025R, previously Gravely 5650 & JD 4010 & JD 1025R
I only mix what I need because it goes all stringy if left in the pump-up sprayer.
Use regular well water that tastes good but does have a lot of water natural chemical dissolved in it.
Ralph
Use regular well water that tastes good but does have a lot of water natural chemical dissolved in it.
Ralph
luvmexfood
Silver Member
If it's the Round Up brand and not a generic there should be a toll free number on the jug that you can call or look on the Monsanto website.
