Stump Grinder
- Thread starter Toffy
- Start date
- Views: 3795
Sam Mac
Bronze Member
I just rent a stump grinder when I need it. Considering the beating these things take I don't want to own one. Rented one last week for $219.00 for the day. Did 25 stumps with it.
Tompet
Platinum Member
- Joined
- Oct 6, 2004
- Messages
- 765
- Location
- Ohio
- Tractor
- Ferguson TO 20, Kubota B3300, BH77, Massey Ferguson 1540
Check out the Massey owning operating section. A gentleman built a front mounted stump grinder for his sub compact GC2300 that is pretty impressive.
3/21/10 post
tp
3/21/10 post
tp
Last edited:
Thanks for the info you are right Sam renting is avialible to me except not all that practical for stump every once in a while .I have visions or a nightmare about a front mounted stump grinder that would shave the stump from the top. I want to use a flywheel from a large diesel engine with cutters attached. Most stump grinders i see go back and forth and have to be lowered in the process.
I have this crazy idea that it could be made a lot simpler.
I have this crazy idea that it could be made a lot simpler.
LBrown59
Super Star Member
- Joined
- Oct 27, 2004
- Messages
- 16,831
- Tractor
- 2003 Kubota BX1500/2004 Kubota Bx23/2005 Kubota BX1500
Diamondpilot
Super Star Member
- Joined
- Jan 18, 2007
- Messages
- 16,316
- Location
- Daleville, IN
- Tractor
- Jinma 254/284 Ford 861 Powermaster at work
I remember seeing one a guy made out of a BH gear box and about 10 old saw mill blades stacked. They must have been 30"
Chris
Chris
Chilly807
Elite Member
The one I've used has been a "Bluebird" model, 13 HP Honda driving a belt to a wheel fitted with carbide tipped cutting bits, almost like lathe tools. Ok as long as the carbides are sharp, otherwise not so good.
Chilly
Chilly
