STX38
- Thread starter pemassa
- Start date
- Views: 786
-
- Tags
- john deere stx38
joecdeere
Veteran Member
- Joined
- Apr 13, 2002
- Messages
- 1,732
- Location
- Cumming,Georgia
- Tractor
- 1948 Allis UC Hi-Crop Cane 1941 Allis WC 1948 Allis G with loader, 1948 Allis G with dual disc 1948 Allis G 1948 Allis G 1949 Allis G 1954 Allis G 1959 Ferguson TO-35 1972 MF 135 1979 Power King 2418 1989 Ford 345C TLB
a worn pulley moving around will finally take it's toll on the input shaft. I have seen people take a new pulley and shim it down a bit to get a new place for pulley to bite shaft
dfkrug
Super Member
- Joined
- Feb 3, 2004
- Messages
- 7,752
- Location
- Santa Cruz Mtns, CA
- Tractor
- 05 Kioti CK30HST w/ Prairie Dog backhoe, XN08 mini-X
The STX38 is a John Deere riding mower with 38" mower deck. The one I had was manual transmission with 1-cyl engine. There is a TBN section for mowers and lawn tractors.
If the input shaft on the final drive is keyed and the key keeps shearing off, first look for a sloppy fit and remedy that. Does the shaft turn easily by hand?
If the input shaft on the final drive is keyed and the key keeps shearing off, first look for a sloppy fit and remedy that. Does the shaft turn easily by hand?
joecdeere
Veteran Member
- Joined
- Apr 13, 2002
- Messages
- 1,732
- Location
- Cumming,Georgia
- Tractor
- 1948 Allis UC Hi-Crop Cane 1941 Allis WC 1948 Allis G with loader, 1948 Allis G with dual disc 1948 Allis G 1948 Allis G 1949 Allis G 1954 Allis G 1959 Ferguson TO-35 1972 MF 135 1979 Power King 2418 1989 Ford 345C TLB
what is the model/serial number on your STX?
