Suggestion for Contents in On-tractor Toolbox

[Learning to Farm]

So, I cleaned out the little "toolbox" on the tractor the other day. I found that it was full of "junk". What do you put in your on-tractor toolbox? I appreciate any suggestions.

 

[johnk]

I always have a couple crescent wrenches and chsnnel locks along with extra lynch pins for my 3 point hitch.

 

[RPW]

I keep a couple of wrenches, pliers,various pins and shear bolts.

 

[Stihlrunner]

Pliers, crescent wrench, penetrant and probably most important fence pliers/cutters and knife for cutting out crap wrapped up in the mower!

 

[Farmwithjunk]

My #1 tractor is a Massey Ferguson. No tools needed! It's that darn reliable!

But seriously folks.....

A Massey Ferguson "plow wrench", fence pliers (which serves as a hammer more often than not), Cresent wrench, water pump pliers, a couple screwdrivers, a roll of baling wire, a few extra linch pins, a pair of gloves, and a roll of electrical tape.

I've got a second tool box (besides the fender mounted OEM box) that is packed with parts, manuals, ect, for the hayin' equipment. It rotates from tractor to tractor as needed.

 

[moored4]

All the the above and Fuses!

 

[Travis_R]

Cutting pliers, Channellock pliers, small crescent wrench, small pipe wrench, extra lynch pins, extra category 1 to 2 conversion bushings, extra top link pins, small screwdriver, and an old rag.

 

[LarryD]

My #1 tractor is a Massey Ferguson. No tools needed! It's that darn reliable!

But seriously folks.....

A Massey Ferguson "plow wrench", fence pliers (which serves as a hammer more often than not), Cresent wrench, water pump pliers, a couple screwdrivers, a roll of baling wire, a few extra linch pins, a pair of gloves, and a roll of electrical tape.

I've got a second tool box (besides the fender mounted OEM box) that is packed with parts, manuals, ect, for the hayin' equipment. It rotates from tractor to tractor as needed.

Baling wire without duct tape is like half a repair.:laughing:

 

[CompactTractorFan]

Assorted bungee cords
Ratchet tie-downs
Danger tape
4 - Electronic flares (2-red, 2-amber)
Garage door opener
Assorted gloves
Large chain w/hooks
Small chain
Utility knife
Flashlight
Pliers (extra long nose & channel lock)
Screwdriver set
Socket set
Complete set of lynch pins
Spare hitch & toplink pins
Parts tray
Rags
Dead blow hammer
Adjustable wrench
Toplink bracket
Hyd. line cap
WD-40

4 traffic cones mounted to tractor...

Am I forgetting anything? I can get pics if you want...

 

[moored4]

Assorted bungee cords
Ratchet tie-downs
Danger tape
4 - Electronic flares (2-red, 2-amber)
Garage door opener
Assorted gloves
Large chain w/hooks
Small chain
Utility knife
Flashlight
Pliers (extra long nose & channel lock)
Screwdriver set
Socket set
Complete set of lynch pins
Spare hitch & toplink pins
Parts tray
Rags
Dead blow hammer
Adjustable wrench
Toplink bracket
Hyd. line cap
WD-40

4 traffic cones mounted to tractor...

Am I forgetting anything? I can get pics if you want...

If you get that all on your bx your going to need a larger tractor just to haul it all! :laughing: :laughing: Yes send PICS! We need proof!