Sweating Copper/Brass

   / Sweating Copper/Brass #21  
Jim, just get screw ends for the copper. Sweat them on and screw them into the valve. If you have a union, it is easy, if not use a copper coupling. Propane torches are normally pretty marginal on heat for sweating copper. Guess you cleaned them and used flux.
 
   / Sweating Copper/Brass
  • Thread Starter
#22  
Wen,

You're the second or third person that said that propane torches are marginal on copper, so I must be one heck of an amateur solderer because I soldered 15-20 spots on 1" copper with no problem at all! /w3tcompact/icons/smile.gif

The problem is the brass valve and I think that Gordon hit the nail on the head, big heat sink and not enough heat. Should have told the guy at the plumbing store that I was an amateur and that I was using propane to get some pointers. Already bought the brass valve with sweat ends.
Might take it to my co-worker, the welding teacher and have him sweat in two pieces of one inch copper, then I can sweat those in place with the propane torch.

Thanks everyone for all of the responses, I knew that the knowledge here would be helpful! /w3tcompact/icons/cool.gif

JimBinMI

We boys and our toys!
 
   / Sweating Copper/Brass #23  
Jim,

If all else fails you can just heat the pool water with the propane torch directly... /w3tcompact/icons/smile.gif
 
   / Sweating Copper/Brass
  • Thread Starter
#24  
bcarter,

No thanks, that would cost more money than using the solar panels! /w3tcompact/icons/laugh.gif

JimBinMI

We boys and our toys!
 

Tractor & Equipment Auctions

Toro Workman Cart (A50322)
Toro Workman Cart...
TAKEUCHI TL150 SKID STEER (A51242)
TAKEUCHI TL150...
2005 Ford F-550 Bucket Truck, VIN # 1FDAF56P45EB88239 (A48836)
2005 Ford F-550...
2017 Freightliner Cascadia 125 Single Axle Sleeper Cab Truck Tractor (A50323)
2017 Freightliner...
NEW 2022 Load Trail CH 83IN x 18FT Equipment Trailer (A51039)
NEW 2022 Load...
2014 VOLVO VHD DAY CAB (INOPERABLE) (A50854)
2014 VOLVO VHD DAY...
 
Top