Taking "CARE" of your little "TOY"!!!!
- Thread starter don716
- Start date
- Views: 3073
rmonio
Platinum Member
Great commentary - and clearly indicative of the fact that we all have different viewpoints.. For me it's not about resale as I never sell my stuff. Consider me a packrat and collector, but I don't do this for the fact that it might have future resell value. I do it because I care, I paid for it, and therefore I'm going to take care of it. My kids will eventually get the value of it.
My comments were directed at the side of society that doesn't understand the value of something they have - usually because it is given - and ultimately destroys the intrinsic values of what the particular item or gift brings (and they along with it). Yes, it's a tool... but so is my Shotgun when I'm slamming clay targets or busting birds. But I do take care of it and if it gets nicked / dinged then eventually I'll take it in for stock refinishing and re-bluing. Don't get me wrong - I believe that tools should be treated as tools... but I was merely commenting on the fact that some of us take care of our stuff because of the fact that it truly means something to us. And therefore it's something we take pride in - always.
But as MG says... "you do your thing - I'll do mine". My soapbox isn't intended to offend anyone other than to point out that it's ok to take care of what we have - because we honor it's value.
-Bob
My comments were directed at the side of society that doesn't understand the value of something they have - usually because it is given - and ultimately destroys the intrinsic values of what the particular item or gift brings (and they along with it). Yes, it's a tool... but so is my Shotgun when I'm slamming clay targets or busting birds. But I do take care of it and if it gets nicked / dinged then eventually I'll take it in for stock refinishing and re-bluing. Don't get me wrong - I believe that tools should be treated as tools... but I was merely commenting on the fact that some of us take care of our stuff because of the fact that it truly means something to us. And therefore it's something we take pride in - always.
But as MG says... "you do your thing - I'll do mine". My soapbox isn't intended to offend anyone other than to point out that it's ok to take care of what we have - because we honor it's value.
-Bob
Fabro
Member
I think it's a good thing to take care of your investment.
Usually it comes down to how hard you had to work to get the money to pay for it but not always. I personally know wealthy people that buy things and take great care of them and these same folks have a son that beats the heck out of his stuff because he knows he can replace it so easily.
I personally cant replace mine so I maintain my equiptment regularly but don't wash it near what I should.
Usually it comes down to how hard you had to work to get the money to pay for it but not always. I personally know wealthy people that buy things and take great care of them and these same folks have a son that beats the heck out of his stuff because he knows he can replace it so easily.
I personally cant replace mine so I maintain my equiptment regularly but don't wash it near what I should.
browns40
Gold Member
Got to take care of things, or they won't take care of you!
Usually the first year or so I'm a maniac--no dirt allowed, keep waxing, etc...
Then the "infatuation" wears off, and I clean & wax to avoid corrosion and damage, touch up to avoid rust, but stop standing there "admiring the baby"!
Always have been a bit obsessive about all the filters, liquids, and petroleum products though... you know: "Geez it's gonna hit 3000 and I'll still be travelling... but McQuicks.... maybe change it before... they recommend 3750...course the rear end does need to be done in..."
Usually the first year or so I'm a maniac--no dirt allowed, keep waxing, etc...
Then the "infatuation" wears off, and I clean & wax to avoid corrosion and damage, touch up to avoid rust, but stop standing there "admiring the baby"!
Always have been a bit obsessive about all the filters, liquids, and petroleum products though... you know: "Geez it's gonna hit 3000 and I'll still be travelling... but McQuicks.... maybe change it before... they recommend 3750...course the rear end does need to be done in..."
I am in the boat of the person that takes care of his stuff. I use mine as a tool (part time business) but I clean my tools after I use them. In my opinion if you take care of your tools you can make more money by avioding the downtime of lack of maintenance. Also it is about the longjevity of your investment. I do not like replacing my tools on a regular basis. When I sold my 770 it looked like I drive it off the lot. I am about to bud another garage si I can store all my attachments indoors also. Right now i do not have that option.
Good to know other owners wax their tractors. I just recently waxed mine this last weekend. When the tractor gets muddy, I wash it. Plain and simple. I also make sure to do all the mechanical lubing/maintenance on it when the manual says it's time.
We have a Kubota L3400 and I spill some diesel on the hood everytime I fill it. Anyone know of any tricks, aside from being really really careful, to not drip any diesel on the hood. I'm sure it's not good on the paint.
I have used a piece of plywood to accomplish the task, but I was wondering what others did. I know I can probably buy one of those electrically operating diesel pumping canisters, but they cost quite a bit. I still use the heavy 5 gallon container; it's a balancing act. LOL.
We have a Kubota L3400 and I spill some diesel on the hood everytime I fill it. Anyone know of any tricks, aside from being really really careful, to not drip any diesel on the hood. I'm sure it's not good on the paint.
I have used a piece of plywood to accomplish the task, but I was wondering what others did. I know I can probably buy one of those electrically operating diesel pumping canisters, but they cost quite a bit. I still use the heavy 5 gallon container; it's a balancing act. LOL.
CurlyDave
Elite Member
I still use the heavy 5 gallon container; it's a balancing act.
I use 5 gallon containers, but have never spilled.
The secret is that there is no law which says you have to put 5 gallons in it. 4 gallons is lighter, easier to handle, and is a lot more forgiving about getting the nozzle in the fill hole before any fuel comes out.
I use 5 gallon containers, but have never spilled.
The secret is that there is no law which says you have to put 5 gallons in it. 4 gallons is lighter, easier to handle, and is a lot more forgiving about getting the nozzle in the fill hole before any fuel comes out.
RobJ
Elite Member
Ahh the old polish/wax debate. I'm probably like most who have a tractor and use it like a tractor. Keep it in tip top mechinical condition. I even spray it with gunk or simple green to keep most of the oil off it. But when bushogging a new ATV trail that must go through a heavy briar patch...It's put on the glasses, keep the arms in, point, and let he rip through the stickers. Partly what I bought it for. Well that and pulling parade floats.
But if I had a smaller B model that I just used around the yard and paid over $10k for it new I'd prolly wax on the weekends to.
But if I had a smaller B model that I just used around the yard and paid over $10k for it new I'd prolly wax on the weekends to.
