BigMccorm
Bronze Member
A little off topic but how much approx. would a TC#0 with FEL cost? I too am looking at buying one.
TC30 vs TC29 or TC33
- Thread starter GARBLUES
- Start date
- Views: 8270
-
- Tags
- new holland tc30
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
</font><font color="blue" class="small">( Have used a TC30 with 5' bush hog without any problems for more than two years now. In fact, the TC30 would probably pull a 6' without any problem, too. )</font>
I agree....weight of a 6 footer might be an issue though.
I agree....weight of a 6 footer might be an issue though.
henryjacobjosh
Bronze Member
I doubt weight would be a problem with the TC30's 1635 lb. 3PT capacity.
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 20,387
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
</font><font color="blue" class="small">( I doubt weight would be a problem with the TC30's 1635 lb. 3PT capacity. )</font>
Hank, I'm not sure what Roy meant, but I don't think he meant the 3PH lift capacity on the TC30. I think he meant needing front ballast to counterbalance a 6' cutter. I think you would need to leave the 7308 FEL installed or add front weight to a TC30. That would be especially true if your work included going up and down hills with the cutter lifted by the 3PH. What has been your experience with your TC30?
Hank, I'm not sure what Roy meant, but I don't think he meant the 3PH lift capacity on the TC30. I think he meant needing front ballast to counterbalance a 6' cutter. I think you would need to leave the 7308 FEL installed or add front weight to a TC30. That would be especially true if your work included going up and down hills with the cutter lifted by the 3PH. What has been your experience with your TC30?
crk133
Silver Member
</font><font color="blue" class="small">( A little off topic but how much approx. would a TC#0 with FEL cost? I too am looking at buying one. )</font>
i recently got quotes for:
TC30 w/hydro and loader 15,800
TC29DA w/hydro and loader 18,350 add 1000 for supersteer
these were quotes from Corriher Implement Company
i recently got quotes for:
TC30 w/hydro and loader 15,800
TC29DA w/hydro and loader 18,350 add 1000 for supersteer
these were quotes from Corriher Implement Company
BigMccorm
Bronze Member
Thanks All I have to do now is some major convincing. /forums/images/graemlins/crazy.gif
henryjacobjosh
Bronze Member
Hi Jinman,
I must say I agree with the front ballast issue. I have personally not used a rotary cutter on my tractor but I do know a guy with a 6' rotary cutter and he has a TC30. He has no problem with the weight of the cutter but he does have a FEL installed. It does OK with general tall grass but larger stumps do slow it down. I personally think the 6' is to large for the PTO HP of the TC30. I don't think you will be able to use the cutter to its full potential. I wasn't trying to knock Roy's comment, I just meant that for its size the TC30 can really work it hard. /forums/images/graemlins/smile.gif
I must say I agree with the front ballast issue. I have personally not used a rotary cutter on my tractor but I do know a guy with a 6' rotary cutter and he has a TC30. He has no problem with the weight of the cutter but he does have a FEL installed. It does OK with general tall grass but larger stumps do slow it down. I personally think the 6' is to large for the PTO HP of the TC30. I don't think you will be able to use the cutter to its full potential. I wasn't trying to knock Roy's comment, I just meant that for its size the TC30 can really work it hard. /forums/images/graemlins/smile.gif