TC33 and TC34 differences

   / TC33 and TC34 differences #11  
My loader is an LX114. Specs with a 68", 265 lb bucket, from the manual -- Lift capacity at maximum height - Pin, 1461 lb. 500 mm forward, 835 lb.
Lift capacity to 1.5 m - Pin, 1861 lb 500 mm forward, 1113 lb.
Breakout force at pin - 3071 lb. 500 mm forward, 1906 lb.

If your information is correct, I'm pretty happy I got the Case rather than the NH back in spring. I'm pretty sure the only differences were in the paint and the lights, not the loaders.

I have a 60" QA bucket, which I presume is a bit lighter than the 68" heavy duty material bucket specs are for.
 
   / TC33 and TC34 differences #12  
daTeacha said:
My loader is an LX114. Specs with a 68", 265 lb bucket, from the manual -- Lift capacity at maximum height - Pin, 1461 lb. 500 mm forward, 835 lb.
Lift capacity to 1.5 m - Pin, 1861 lb 500 mm forward, 1113 lb.
Breakout force at pin - 3071 lb. 500 mm forward, 1906 lb.

If your information is correct, I'm pretty happy I got the Case rather than the NH back in spring. I'm pretty sure the only differences were in the paint and the lights, not the loaders.

I have a 60" QA bucket, which I presume is a bit lighter than the 68" heavy duty material bucket specs are for.

The new Holland and Case loaders for the class II Cuts changed at the same time (I just don't happen to remember exactly when that time was), so that would not have been a factor in choosing one over the other.

John Mc
 

Tractor & Equipment Auctions

Texas Post Driver Series 500 Heavy-duty Hydraulic Post Driver (A51039)
Texas Post Driver...
2015 Volkswagen Passat 1.8T SE Sedan (A50324)
2015 Volkswagen...
2015 VOLVO TRUCK VN SERIES (A50854)
2015 VOLVO TRUCK...
2019 KENWORTH T880 (A50854)
2019 KENWORTH T880...
1985 International X Con Semi (A50514)
1985 International...
2-Row Peanut Inverter (Chain Drive, PTO, 3-Point Hitch) (A51039)
2-Row Peanut...
 
Top