djradz
Veteran Member
Jim, how about a waxy grease, like LPS 3, or something that doesn't attract so much dust. I haven't seen the problem with the sticking pedals, but I did spray some oil in the rollers.
tc35d
- Thread starter Anonymous Poster
- Start date
- Views: 1565
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 20,387
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
That might work, Duane. Actually, the last time I did it, I used chain lube. When it dries out, it leaves a dry lubricant, so I think it is similar to the waxy grease. The worst sticking I have had was in the first week I had my tractor and the forward pedal would stick like I had cruise turned on unless I stepped on the reverse pedal. Now, after 200+ hours, the pedal will sometimes just return slowly and that's when I get out my can of lube.
As you mentioned earlier, my tractor will creep if it's not on level ground. If I need to keep my bucket raised when I get off the tractor, I always set the parking brake or drop my boxblade if it is attached.
As you mentioned earlier, my tractor will creep if it's not on level ground. If I need to keep my bucket raised when I get off the tractor, I always set the parking brake or drop my boxblade if it is attached.
