TC40D HST Peddles Sticking Under Load Only

   / TC40D HST Peddles Sticking Under Load Only #1  

JJones

New member
Joined
Jul 24, 2000
Messages
12
Tractor
TC40D w/SS
I have a TC40D with HST Forward and Reverse peddles sticking. This only occurs when the tractor is pulling load. Any other time, no problem.

I have seen a number of posts on this subject but haven't seen any that makes sense with my issue.

Jim
 
   / TC40D HST Peddles Sticking Under Load Only #2  
Jim, that happened to me right after I got my tractor and I thought it was the cruise control, but found out the the large "B" shaped plate attached to your foward pedal (underneath the deck) could be lubed with some spray lithium grease and the sticking went away. Unfortunately, dust loves that grease too, so I have had to repeatedly clean and lube that plate (3 times) in the first 125 hours on my tractor. I'm hoping that with wear over time this problem will go away. It's been responsible for a couple of good scares already.

JimI
 

Tractor & Equipment Auctions

Unused Delta Crash Attenuators (A49461)
Unused Delta Crash...
1969 JOHNSON J25 GOOSENECK TRAILER (A51222)
1969 JOHNSON J25...
2021 Caterpillar 304E2 Mini Excavator (A50322)
2021 Caterpillar...
2014 GOOSENECK DRIVER SIMULATOR TRAILER (A50854)
2014 GOOSENECK...
2021 CATERPILLAR 299D3 XE SKID STEER (A51242)
2021 CATERPILLAR...
19010 (A48082)
19010 (A48082)
 
Top