TC40D hydro creeping foward

[spitter]

I change to the updated spring, and it didn't. Also, it will still creep a little if you keep it under the manual recommended 2 k RPM, s.

 

[dieselscout80]

I change to the updated spring, and it didn't. Also, it will still creep a little if you keep it under the manual recommended 2 k RPM, s.

Mine is not creeping but it’s not returning to neutral/center all the time.

 

[ConawayFarms]

I had the same issue on my TC33. Even after greasing everything, it still crept forward. Turned out the detent spring under the pedal plate was worn out. Replacing it fixed the problem completely