Thanks Guys, From R&B

TerryinMD · Dec 26, 2001

I have a 4100 and mounted the 25C on the hood with the old style mount. Had to drill holes into the hole. Boy, I really hated to do that. When I purchased my tiltmeter, the new style mount was not available.

So, go with the new style mount and you have a couple of options unless you leave your FEL on at all times. With the newer mount, you can either put the meter on the hood or on the top side of the dash. The problem with the dash mount is that it is up to close and you may ignore it. Also, it could possibly interfere when steering. Can't remember which TBNer mounted the tiltmeter to his FEL mount post, but it is an option.

My personal recommendation, 25C with new mount, right in the middle of the hood.

Good luck.

Terry

forestcreature · Dec 28, 2001

Thanks guys!

Just got off the phone with Rick & Brenda, ordered the 25C for the side tilt, and the 7489 for the front/rear angle.
[took the advice to get the new mounts too]. I will keep you posted on my install