murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 19,509
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
Yes my friend I have finally found it.:dance1:
The infamous Ventrac squeek.
- Thread starter prs
- Start date
- Views: 10061
Yes my friend I have finally found it.:dance1:
Well, I am not sure it helps, but I am also in habit of smearing a little grease on the front arms and the pins that the lock mechanism engages.
Let me try to recall the ones on the 4500 power unit: 2 on the front lift arms, 2 on the steering cylinder eyes, 2 on the lift cylinder eyes, 2 on the lateral articulation bar, 1 on the rotational articulation ball joint, and 2 on the "drive shaft". I have no three point, or there would be more. So, TN is right because 11 is about 10 ;-)
Now, the contour mower; Oh my! It has beaucoup-plenty!
prs
Let me try to recall the ones on the 4500 power unit: 2 on the front lift arms, 2 on the steering cylinder eyes, 2 on the lift cylinder eyes, 2 on the lateral articulation bar, 1 on the rotational articulation ball joint, and 2 on the "drive shaft". I have no three point, or there would be more. So, TN is right because 11 is about 10 ;-)
Now, the contour mower; Oh my! It has beaucoup-plenty!
prs
