Thinking of building a snow plow set-up for skid steer

[rmc125mx]

Nice setup, rmc125mx, any reason you ran the mounts underneath, was this to make it shorter? Also what size hoses are you running from your third function(I have the same fisher plow setup that I'm welding together onto a mount)? Also are you using a flow restricter to slow down the angle? Sorry for the multiple questions just building it up now

I tucked the mounts under just so I could keep the weight and plow as close to the tractor as I could. I used 1/4 hoses because that's what my 3rd function is plumbed with and that's what the plow cylinders originally had. The only thing I'm running on the plow is a cushion valve. No restrictors. It's not a super fast angle but just right. Only problem with my 3rd function being a true 3rd, and electrical valve, there is no feathering the angle. All in all, I'm supper happy with the way it all turned out!

 

[Fallon]

Nice setup, rmc125mx, any reason you ran the mounts underneath, was this to make it shorter? Also what size hoses are you running from your third function(I have the same fisher plow setup that I'm welding together onto a mount)? Also are you using a flow restricter to slow down the angle? Sorry for the multiple questions just building it up now

I wish mine previous build & my new plow were a bit shorter & more compact. The loader on a tractor sticks out a LOT further than the loader on the skid steer. So making it a bit more compact is more relevant for a tractor than skid steer.