Needing some help on a third function install on a LS MT3. The kit comes with a “joint kit” but the instructions never tells where it goes. I’m sure it goes in between the loader and third function valve but I’m not sure of which direction.
Third function install issue
- Thread starter Tide2021
- Start date
- Views: 843
m5040
Platinum Member
- Joined
- Nov 23, 2008
- Messages
- 997
- Location
- CT
- Tractor
- Kubota M6040 L2250, JohnDeere 310D, Ford 841 Elenco, Ford 961, Trapmaster, PT180 w/LM bucket and 45" brush cutter, PT1430 Deutz w/grapple bucket, Antonio Carraro Tigrecar 6500. John Deere 5300. Former owned Steiner 430 max, Goldoni REV Maxter 7
Just a guess, but either to joint more valves in series or to enable you to attach the new joystick to the old lever?
Dave M7040
Elite Member
- Joined
- Dec 10, 2012
- Messages
- 2,757
- Location
- Williamstown Ontario Canada
- Tractor
- Kubota M7040 Nuffield 465
The instructions you need are in the Assembly Manual for the loader. As an example, I have attached this manual for a M7040 with LA1153 loader but expect same or very similar.
Working on the M series ( and other tractor) hydraulics requires great care or the main pump will be destroyed.
Your photo of the page with the joint kit is not clear so suggest you post a photo of the real part.
I suspect it may be a power beyond sleeve for the loader valve. How many hoses presently connect to the loader valve. 6 or 7?
It makes a big difference!!!
Dave M7040
Working on the M series ( and other tractor) hydraulics requires great care or the main pump will be destroyed.
Your photo of the page with the joint kit is not clear so suggest you post a photo of the real part.
I suspect it may be a power beyond sleeve for the loader valve. How many hoses presently connect to the loader valve. 6 or 7?
It makes a big difference!!!
Dave M7040
Last edited:
Thanks for the advice. I’ll post up some more pictures when I get a chance. The loader valve acts as a manifold, third function mount directly to it with o-rings in between. I’m in North Carolina but actually found a dealer in Alabama willing to help out , they deal with a lot of larger tractors but haven’t ran into this issue yet. Hopefully hear something back today.