Third function too fast

   / Third function too fast #1  

nbking

Gold Member
Joined
Jul 5, 2018
Messages
303
Location
Sonora, CA
Tractor
Kubota L2501HST. RTV-X 900.
I have a third function valve and handle with switches for left and right angle on my snowplow blade. When I tried it out, it really flies left and right with the buttons. My question is there a way to slow down the movement? I couldn't find anything in the third function valve paperwork, but it was just an install guide really. Thanks
 
   / Third function too fast #2  
Third function valves are either fully open or fully closed so there is no feathering ability. What most people do is adding a couple of flow control valves to the cylinders that angle the blade.

Here is a video that explains a little better what I'm trying to say.

 
   / Third function too fast #3  
I have a third function valve and handle with switches for left and right angle on my snowplow blade. When I tried it out, it really flies left and right with the buttons. My question is there a way to slow down the movement? I couldn't find anything in the third function valve paperwork, but it was just an install guide really. Thanks

Get a couple of these that are the correct size for your couplers.

Get the .031 orifice. :thumbsup:
 
   / Third function too fast
  • Thread Starter
#4  
Thanks for the replies. Will check into those options. Thanks
 
   / Third function too fast #5  
Thanks for the replies. Will check into those options. Thanks
My TnT cylinders from FitRite have the restrictors on them (just a tiny hole in the fitting instead of full hose diameter). Works well & slows things down nicely.
 

Tractor & Equipment Auctions

RING 3 STARTS HERE @ 9:30 AM (A50460)
RING 3 STARTS HERE...
Adams Load Out Conveyor - Stainless Steel Assembly - Baldor Electric Motor (A50397)
Adams Load Out...
2008 Ford Crown Victoria Sedan (A48082)
2008 Ford Crown...
New/Unused 20ft Iron Farm Driveway Gate (A48837)
New/Unused 20ft...
2020 MACK GRANITE GR64B DUMP TRUCK (A50459)
2020 MACK GRANITE...
PALLET OF MISC 4X120X080 COVE BASE BLACK (A50460)
PALLET OF MISC...
 
Top

Looks like your ad blocker is on.

×

We rely on ads to keep creating quality content for you to enjoy for free.

Please support our site by disabling your ad blocker.

Continue without supporting us

Choose your Ad Blocker

  • Adblock Plus
  • Adblock
  • Adguard
  • Ad Remover
  • Brave
  • Ghostery
  • uBlock Origin
  • uBlock
  • UltraBlock
  • Other
  1. In the extension bar, click the AdBlock Plus icon
  2. Click the large blue toggle for this website
  3. Click refresh
  1. In the extension bar, click the AdBlock icon
  2. Under "Pause on this site" click "Always"
  1. In the extension bar, click on the Adguard icon
  2. Click on the large green toggle for this website
  1. In the extension bar, click on the Ad Remover icon
  2. Click "Disable on This Website"
  1. In the extension bar, click on the orange lion icon
  2. Click the toggle on the top right, shifting from "Up" to "Down"
  1. In the extension bar, click on the Ghostery icon
  2. Click the "Anti-Tracking" shield so it says "Off"
  3. Click the "Ad-Blocking" stop sign so it says "Off"
  4. Refresh the page
  1. In the extension bar, click on the uBlock Origin icon
  2. Click on the big, blue power button
  3. Refresh the page
  1. In the extension bar, click on the uBlock icon
  2. Click on the big, blue power button
  3. Refresh the page
  1. In the extension bar, click on the UltraBlock icon
  2. Check the "Disable UltraBlock" checkbox
  1. Please disable your Ad Blocker
  2. Disable any DNS blocking tools such as AdGuardDNS or NextDNS

If the prompt is still appearing, please disable any tools or services you are using that block internet ads (e.g. DNS Servers).