Thoughts on platform legs

   / Thoughts on platform legs #1  

tomplum

Elite Member
Joined
Jan 30, 2017
Messages
2,784
Location
PNW
Tractor
XJ2025H
I need to get some 30" legs under a heavy, 2 ton platform. It is basically built out of 4" channel , 8 x 15 with 10 legs underneath. My first thought was to stitch some 4" channel that I had for legs , but then thought I may be best with some heavy box or round tube. Dare I consider schedule 40 pipe?
 
   / Thoughts on platform legs #2  
Sc 40 more den hold de weight long as you got good bottom plates. Remember to leave drain where pipe meets plate. Diagonal braces good idea too.
 

Tractor & Equipment Auctions

1973 CATERPILLAR 988 LOADER (A51222)
1973 CATERPILLAR...
2021 CATERPILLAR 259D3 SKID STEER (A51242)
2021 CATERPILLAR...
2016 Ram 1500 4x4 Crew Cab Pickup Truck (A49461)
2016 Ram 1500 4x4...
2020 JLG 1732 16,755lb 4x4 High-Capacity Rough Terrain Telehandler (A49461)
2020 JLG 1732...
2004 STERLING LT9500 SERIES MIXER TRUCK (A50854)
2004 STERLING...
(INOP) VOLVO L110H WHEEL LOADER (A50459)
(INOP) VOLVO L110H...
 
Top