Tiltmeter mounting on JD 4XX0

   / Tiltmeter mounting on JD 4XX0
  • Thread Starter
#11  
Golfgar4 -

When I installed the tiltmeter, I did it on level ground and then put a level on the gauge to get it level too.

The tractor is parked in a carport that hangs off the side of the garage. The floor has a slope on it, which is why it doesn't read "0".

Steve
 
   / Tiltmeter mounting on JD 4XX0
  • Thread Starter
#12  
Chief - Briar Hopper (Tom) is a friend of mine. We are both pretty heavy into the GLTDR. Both power upgrades (EZ box and DD2 injectors) improved my mileage. Try that with a gasser!

Regarding your fuel pressure, I'd say that 6psi is pretty low. My service manual says it should never fall below 10 psi. I've had 2 lift pumps replaced already.

My next tractor project is to add more lights. I can't see much with the loader at carry level. I need lights on the rollbar I guess. I already have one on the back so I can see the implements and hook up in the dark.

Steve
 

Tractor & Equipment Auctions

PALLET OF SQUEEZE OFFS (A50854)
PALLET OF SQUEEZE...
2005 International 4200 Texoma UC-301 Pier Drilling Truck (A49461)
2005 International...
2019 KENWORTH T880 (A50854)
2019 KENWORTH T880...
2019 Fontaine EQ1 Hydraulic Spreader Arm (A49461)
2019 Fontaine EQ1...
2019 VOLVO VNL760 TANDEM AXLE SLEEPER (A51219)
2019 VOLVO VNL760...
48ft Low Boy T/A Trailer (A49346)
48ft Low Boy T/A...
 
Top