Tiltmeter mounting on JD 4XX0

   / Tiltmeter mounting on JD 4XX0
  • Thread Starter
#11  
Golfgar4 -

When I installed the tiltmeter, I did it on level ground and then put a level on the gauge to get it level too.

The tractor is parked in a carport that hangs off the side of the garage. The floor has a slope on it, which is why it doesn't read "0".

Steve
 
   / Tiltmeter mounting on JD 4XX0
  • Thread Starter
#12  
Chief - Briar Hopper (Tom) is a friend of mine. We are both pretty heavy into the GLTDR. Both power upgrades (EZ box and DD2 injectors) improved my mileage. Try that with a gasser!

Regarding your fuel pressure, I'd say that 6psi is pretty low. My service manual says it should never fall below 10 psi. I've had 2 lift pumps replaced already.

My next tractor project is to add more lights. I can't see much with the loader at carry level. I need lights on the rollbar I guess. I already have one on the back so I can see the implements and hook up in the dark.

Steve
 

Tractor & Equipment Auctions

2013 MACK GU813 GRANITE ROLL OFF TRUCK (A50854)
2013 MACK GU813...
2019 CATERPILLAR 326FL EXCAVATOR (A51242)
2019 CATERPILLAR...
2015 PETERBILT 367 HOT OIL (A50854)
2015 PETERBILT 367...
2-Row Peanut Inverter (Chain Drive, PTO, 3-Point Hitch) (A51039)
2-Row Peanut...
12in Backhoe Bucket (A51039)
12in Backhoe...
2014 INTERNATIONAL PROSTAR (A50854)
2014 INTERNATIONAL...
 
Top