Time for GC2300 to be put out to pasture. Maybe an MF1725?

[loulblades]

To All,

Have been running this GC2300 for nearly 20 years and now I have convinced the treasurer it is time for a new one. We have some property along the river that I figure the 2300 has still got enough to maintain for at least awhile.

I have looked at multiple tractors including Mahindra, New Holland and JD but I keep coming back to Massey. Maybe it is just what I am used to, but with all the work I have done on this tractor maybe familiarity is the word.
I considered the 1723 but after sitting on the 1725 I liked the seat and layout better. I will only be purchasing the tractor and front loader, I don't need the backhoe or finish mower.

Any input would be greatly appreciated.

Thanks,
Lou

BTW even though I am not getting the backhoe, I am trying to convince the dealer to sell to me with the folding ROPS. I like the space behind me and being able to pull into a lower garage.

 

[loulblades]

Picked up a new GC 1725 on Friday. Not much different than the my old 2300 to operate but a few updates. I was able to have my dealer put on a used folding ROPS from a tractor that has the backhoe. I mowed with it yesterday and appreciated the seat comfort compared to my old 2300.

This thing must have a larger fuel tank (haven't checked that yet) or way better fuel mileage because I normally use a 1/4 or so tank to mow but it barely came off full.

I mentioned to my SO that it had cruise control, I think she thought that was one of funniest things she ever heard...a tractor having cruise control. She also mentioned something about me having another toy to play with .

Lou

 

[GeneV]

Congrats! There are definitely updates with these new models, the loader joystick location, tilting steering wheel, the flat/peace floor matt, and quite likely your old one doesn't have a SSQA loader like standard on the new ones.

Some people laugh at cruise control on a tractor, but here's a HUGE benefit I found...going up hills. I don't know if this is Massey specific or all HST trans, but on my GC I get so much pushback on the pedal when going up hills, my right knees starts hurting. So what I do now, I push that pedal down, lock the cruise control, and up I go w/o a care. I just hover my foot over the pedal in case I need to unlock it fast for some reason.

 

[loulblades]

I did use the SSQA to remove the bucket for mowing. Although I do like the location of the FEL joystick I kept reaching for the old one. Takes time to teach an old dog a new trick.

One thing I am disappointed about is the lack of schematics in the manual (unless I am missing them). With all the safety notices, the user manual is about twice the size of my old one so maybe they decided to save some paper. I have a mod I built for my old tractor (but never implemented) and I need schematics to install it. Some quick searches make me think I need to buy the service manual.

Lou

 

[tacticalturnip]

That's a nice upgrade; they've come far in ergonomics.

 

[CaptPat]

I bought the workshop manual for my 1840M to get the schematics. AGCO pubs website is where I purchased mine.

 

[jeepcj7]

Get ballast for your loader. Might consider 3rd function for the loader if you think a grapple will be handy some day.

 

[loulblades]

jeepcj7

II very seldom use the loader by itself. The rear k blade is usually on.

I did add a float lock for the 3pt.. When I am mowing with the the rear mower or tiller, I like the (well require) the 3pt to be able to float up and down. I used heavy duty dual sided tape because I am not sure that I want to put holes in the sheet metal. I will if the tape doesn't hold but it did for first mowing.

 

[Mekale]

To All,

Have been running this GC2300 for nearly 20 years and now I have convinced the treasurer it is time for a new one. We have some property along the river that I figure the 2300 has still got enough to maintain for at least awhile.

I have looked at multiple tractors including Mahindra, New Holland and JD but I keep coming back to Massey. Maybe it is just what I am used to, but with all the work I have done on this tractor maybe familiarity is the word.
I considered the 1723 but after sitting on the 1725 I liked the seat and layout better. I will only be purchasing the tractor and front loader, I don't need the backhoe or finish mower.

Any input would be greatly appreciated.

Thanks,
Lou

BTW even though I am not getting the backhoe, I am trying to convince the dealer to sell to me with the folding ROPS. I like the space behind me and being able to pull into a lower garage.

Good Morning!
I would definitely get the Massey GC1725M. Iv'e had mine for 5yrs and it hasn't let me down yet. I have 20 acres and 4 horses woods. I t has been the best thing I purchased. Size wise it's a lot of tractor for the buck. I've move trees, dirt, and dug a pond. I have several attachments for it also. It's just a great tractor!

 

[Mekale]

jeepcj7

II very seldom use the loader by itself. The rear k blade is usually on.

I did add a float lock for the 3pt.. When I am mowing with the the rear mower or tiller, I like the (well require) the 3pt to be able to float up and down. I used heavy duty dual sided tape because I am not sure that I want to put holes in the sheet metal. I will if the tape doesn't hold but it did for first mowing.

View attachment 823175

Do you have a belly mower with yours? I do and haven't tried the floating with it.