Looking4new
Super Star Member
- Joined
- Apr 8, 2012
- Messages
- 10,204
- Location
- Northern Ontario, Canada
- Tractor
- 2012 Kioti CK27HST w/cab
DO NOT use 4wheel drive on bare dry pavement.
Last edited:
Tips, tricks or any info on new to me dk40se hydro
- Thread starter Orange blood
- Start date
- Views: 5639
OP
Orange blood
Member
Thanks for all the the info . Good things to know . Did some bush hog work the other day and I love this thing
Coyote machine
Super Member
- Joined
- May 4, 2009
- Messages
- 7,663
- Location
- Southern VT
- Tractor
- 22 SANY SY 50U, '10 Kioti DK 40se/hst KL-401 FEL, loaded tires, KB-2485 bhoe, Tuffline TB160 BB, Woods QA forks, MIE Hydraulic bhoe thumb & ripper tooth, Igland 4001 winch, & GR-20 Log Grapple. Woods BBX72" Brush Mower. Diamondplate aluminum canopy
Good to hear!
I've found recently that if I keep my ground speed slow, even in medium range, and adjust my RPM according to the terrain and type of stuff I'm cutting anywhere from 2000-PTO RPM of 2500 that I get good results when hoggin'
OP
Orange blood
Member
Thanks I was in medium at about 2200 rpms and seemed about right
Looking4new
Super Star Member
- Joined
- Apr 8, 2012
- Messages
- 10,204
- Location
- Northern Ontario, Canada
- Tractor
- 2012 Kioti CK27HST w/cab
If you are running a PTO powered implement then jack the RPM's up to the little triangle on the tachometer.
caver
Veteran Member
- Joined
- Dec 20, 2006
- Messages
- 1,922
- Location
- Southeast Missouri
- Tractor
- Fisher Price, toddlers first tractor.
If you park it inside a barn, lift the hood and leave it up. Mice seem to really enjoy Kioti wiring insulation.
Coyote machine
Super Member
- Joined
- May 4, 2009
- Messages
- 7,663
- Location
- Southern VT
- Tractor
- 22 SANY SY 50U, '10 Kioti DK 40se/hst KL-401 FEL, loaded tires, KB-2485 bhoe, Tuffline TB160 BB, Woods QA forks, MIE Hydraulic bhoe thumb & ripper tooth, Igland 4001 winch, & GR-20 Log Grapple. Woods BBX72" Brush Mower. Diamondplate aluminum canopy
Exactly.
Can, but not necessary, unless one needs all the RPMs to do the cutting needed. Then of course use them.
Coyote machine
Super Member
- Joined
- May 4, 2009
- Messages
- 7,663
- Location
- Southern VT
- Tractor
- 22 SANY SY 50U, '10 Kioti DK 40se/hst KL-401 FEL, loaded tires, KB-2485 bhoe, Tuffline TB160 BB, Woods QA forks, MIE Hydraulic bhoe thumb & ripper tooth, Igland 4001 winch, & GR-20 Log Grapple. Woods BBX72" Brush Mower. Diamondplate aluminum canopy
Exactly.
Can, but not necessary, unless one needs all the RPMs to do the cutting needed. Then of course use them.
GMIslander
Silver Member
If you cannot find the hood release keep looking it's just shoved up tight to the frame.
I thought that box was for an emergency pint, tools in the cab.
I thought that box was for an emergency pint, tools in the cab.
OP
Orange blood
Member
Next ?? I lost a pin that is in the adj stabilizer it has a coter pin on bottom and I believe a rubber washer on top maybe on bottom too . Each stabilizer has 2 pin one in on a chain I believe I did not loose the one with the chain . Where is best place to look for these if need to I can take a pic of it ( prob be upside down) I went to a couple hard ware stores and found something to work til I can get a few of the real ones . Was hoping to stay away from dealer , prob be paying triple