Barnboy
Gold Member
The front tires are marked 35psi max, rear tires marked 20psi. I filled the front tires to 30psi and the rear to 20psi. Just curious if its ok to fill the front tires to 35psi with a loader.
Tire pressure for R4 2910/B3030
- Thread starter Barnboy
- Start date
- Views: 3122
-
- Tags
- kubota b3030
Toolguy
Platinum Member
Seems like you have answered your own question. If the front tires are marked for a maximum of 35psi then that should be OK. Better to have too much air in a tire than too little. Especially with a FEL.
OP
Barnboy
Gold Member
Yeah I looked in the owners manual. Should have looked there first. 35 psi front and 20 psi rear. They must have been low for a while. They were at 20psi when I checked them.
