Barry Bowen
Gold Member
You also need to clean out the inside of the tire as it will still have a significant amount of corrosive material left in it that will work its way out.
Tire Valve Stem Failure ?
- Thread starter Dave5264
- Start date
- Views: 4119
OP
Dave5264
Gold Member
- Joined
- May 25, 2009
- Messages
- 376
- Location
- Near North Ontario Canada
- Tractor
- 08 Montana C5264, 2011 McCormick CX100 XS
The dealer came out and did the job on site. I was within my 1 yr warranty period and it was clearly a defect in the tube (vs something I did).
they rinsed/cleaned the rim as well
Interestingly, he did mention that he also found it unusual that very little/no calcium was evident in the rim/inside the tire. He figured it was due to where the stem was leaking, ie the was leaking outside the rim vs a puncture leaking inside
they had to do more rinsing on the outside of the rim since thats where the leakage occured.
they rinsed/cleaned the rim as well
Interestingly, he did mention that he also found it unusual that very little/no calcium was evident in the rim/inside the tire. He figured it was due to where the stem was leaking, ie the was leaking outside the rim vs a puncture leaking inside
they had to do more rinsing on the outside of the rim since thats where the leakage occured.
