3-Point Hitch To replace, or not replace the 3-point lift arm seals on Jinma 284

[leop]

Hi Everyone,

I have a Jinma 284 tractor. I have the transmission top cover and Hydraulic top cover (under the seat) off and drained in order to rebuild the piston seals on the 3-point. The kit includes seals for the lift arms. Now my current arms are not leaking or drifting out of the correct position so I am inclined to not go to the trouble of replacing the seals.

However, taking this all apart and replacing the fluids is a real pain and so I don't want to skip doing the 3-point arm seals only to find out later that I should have becuase of the BLahh ... Blahhh ....Blahh problem.

So my question to those more experienced than I is: Is there any reason to mess with the seals on the 3-point arms if they are not leaking?

Thanks for any insight you guys and gals can provide.

Leo

 

[Affordable]

The 3- point arm seals can be replaced without removing the lift box. ?? You just have to remove the upper Sub arms, if they are not leaking don't worry about them


Tommy
Affordable Tractor Sales
"Your Jinma Parts Superstore"
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

 

[leop]

The 3- point arm seals can be replaced without removing the lift box. ?? You just have to remove the upper Sub arms, if they are not leaking don't worry about them


Tommy
Affordable Tractor Sales
"Your Jinma Parts Superstore"
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

Thanks Tommy.