CanuckPT
Gold Member
Pond "renewal" project done! About 6 hours total.
Sent from my iPhone using TractorByNet
Sent from my iPhone using TractorByNet
TODAYS SEAT TIME
- Thread starter LBrown59
- Start date
- Views: 2691520
Sysop
Elite Member
- Joined
- Jun 7, 2013
- Messages
- 3,301
- Location
- Fairmont, WV
- Tractor
- Mahindra 4035HST purchased 2013 - Husqvarna TS348-D purchased 2019 - Craftsman 42" HST purchased 2003
All I did was clean out a pile of logs I found under some brush at the corner of the field. Behind the logs I found a partially uprooted stump. I finished breaking off the roots with the tractor, picked it up, and toted it up the hill.
.jpg)
I dumped it in a ravine with the rest of the logs I cleared out.
Carried the Rhino off the hill too...
I dumped it in a ravine with the rest of the logs I cleared out.
Carried the Rhino off the hill too...
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Nice pics, sysop... Good work!
gwstang
Platinum Member
Nice, you carry backup along with you...lol Been lots of times when way down in the woods, I could have used an atv/utv with me and the tractor. :laughing:
jimjumper
Silver Member
View attachment 485254View attachment 485253Pictures of my tractor the neighbor gave me. Worth the time to get running?
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,326
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
I'd say not. Send it to me for proper disposal. Here's my free mower I've been working on. 
And I've got a burned Dixie Chopper I've been working on.
I've about got the Dixie chopper ready for a test run.
And I've got a burned Dixie Chopper I've been working on. I've about got the Dixie chopper ready for a test run.
Sysop
Elite Member
- Joined
- Jun 7, 2013
- Messages
- 3,301
- Location
- Fairmont, WV
- Tractor
- Mahindra 4035HST purchased 2013 - Husqvarna TS348-D purchased 2019 - Craftsman 42" HST purchased 2003
Yea, Rhino is just a tad over a thousand pounds, plus what it carries. Doesn't tax the tractor at all to tote it along. If I need anything from the house while on the back of the hill, one-way is a 20-25 minute ride on the tractor and about 6 or 7 in the Rhino.
Sysop
Elite Member
- Joined
- Jun 7, 2013
- Messages
- 3,301
- Location
- Fairmont, WV
- Tractor
- Mahindra 4035HST purchased 2013 - Husqvarna TS348-D purchased 2019 - Craftsman 42" HST purchased 2003
That is in really nice shape and should have good parts availability. I don't think there is anything about a tractor that nice that could be broken in such a way that a repair is not totally worth it.
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Yep nice setup! If I had that far to go I now know how I would do it! :thumbsup: