Tool box

[TheMan419]

So I finally got around to adding a tool box to my Boomer 24. A 50 cal ammo can fits on the back bumper behind the seat just fine. There were 2 holes in the bumper from the factory. Drilled holes in the can to match.

Now the question of the day.... what useful things to put in it?

Adjustable wrench (mainly to level 3 point implements)
Flash light
Zip ties
Duct tape
Shear pins and appropriate size wrench to change

What else?

 

[Quebecguy]

Hammer, screwdriver, pliers, knife.

 

[Thomas]

Vice grips rags. electric tape.

 

[/pine]

insect repellent, super glue, multi-tool...

 

[Redlands Okie]

Your list plus adjustable pliers, preferably one that can cut wire if need be, piece of tie wire, screwdriver with several tips in the handle, knife, gloves, hammer for lining up pins ?

Bug spray, safety glasses, face mask for dust, ?

Not sure what you do with your tractor or how far from the barn or house you work.

 

[TheMan419]

Your list plus adjustable pliers, preferably one that can cut wire if need be, piece of tie wire, screwdriver with several tips in the handle, knife, gloves, hammer for lining up pins ?

Bug spray, safety glasses, face mask for dust, ?

Not sure what you do with your tractor or how far from the barn or house you work.

We have a horse farm. 18 acres so not too far from the house. However I don稚 like wasting time

Main use will be bush hog the pasture. Move horse manure and move hay.

Most of the ideas here are good. I値l have to find a hammer small enough to fit....

 

[silvertramp]

We have a horse farm. 18 acres so not too far from the house. However I don稚 like wasting time

Main use will be bush hog the pasture. Move horse manure and move hay.

Most of the ideas here are good. I値l have to find a hammer small enough to fit....

HF has a nifty short handled hammer. I bought one for my tiny GF, and she loves it.

 

[Phillip w]

I carry a set of open box end wrenches on my allis Chalmers. It is all sae. They are in a plastic pouch that I can roll up. The allis Chalmers has a nice tool box on the left side of the seat. Now ago was not thinking ahead with the new mf. There is no tool box. What were thinking???

 

[Brotherdan]

Spare pins/clips, volt-ohm meter, rubber gloves and some garbage bags.