Tool to remove valve cores?

[Mith]

Any ideas on how to make one. Just filled one tyre with water using a small screwdriver to remove the core but the other tyre valve core is stuck, need a tool to remove it. Any idea how to make one, all shops closed beace its sunday.
Thanks for any ideas

 

[chim]

16d nail with a groove cut into it. Chop off the point, then cut into it from the end. May be able to do it w/ a hacksaw, or a Dremel for sure................chim

 

[Mith]

worked like a charm, thanks

 

[Priz]

A cotter pin can also double as a valve core removal tool.

sorry about bumping an old thread, just offereing up alternatives

 

[LBrown59]

</font><font color="blue" class="small">( Any ideas on how to make one. Just filled one tyre with water using a small screwdriver to remove the core but the other tyre valve core is stuck, need a tool to remove it. Any idea how to make one, all shops closed beace its sunday.
Thanks for any ideas )</font>

============

I keep at least one valve cap on my tractors that has an end
on them for removing valve cores.