Toothbar for my 4410

   / Toothbar for my 4410 #1  

kwahl

Bronze Member
Joined
Aug 29, 2003
Messages
57
Location
Western NY
Tractor
John Deere 4320
I called FCC (as mentioned somewhere here) and they would not sell their toothbar direct to me but did tell me that it retials for $265.00. I called my dealer and gave them all the information (as of my last call they did not know of a toothbar that I could use) and they gave me a price of $266.00 + $50.00 S&H, and $50.00 install ($25.00 per hole!)

Carver's toothbar is $259.00 +$40.00 S&H direct. Therefore, $60.00 more from the dealer installed.

Any thoughts on the differences between these two.
 
   / Toothbar for my 4410 #2  
Kwahl,
I personally think that $25 per hole is a bit excessive. Drilling the holes is a piece of cake and there are threads on various ways to do it. I purchased my toothbar from Carver and am delighted with the bar and the price.
Bill
 
   / Toothbar for my 4410 #3  
I put my toothbar on also, went on no problem...
 
   / Toothbar for my 4410 #4  
I don't think $50 is unreasonable IF they bore the holes with a hole saw or drill bits, and do a nice job. I suspect, however, they would use a cutting torch, in which case I would put my $50 into a set of hole saws and 1/2" drill.
 
   / Toothbar for my 4410
  • Thread Starter
#5  
Thanks for the help and opinions. I got the dealer to waive the $50.00 install fee. I'm sure it was a hard decision for them since I am only spending $32,000 on my new 4410! /forums/images/graemlins/grin.gif
 
   / Toothbar for my 4410 #6  
Wow! You must be getting a lot of toys for that price! I'm guessing a backhoe and loader are part of that package.
 
   / Toothbar for my 4410
  • Thread Starter
#7  
4410, E-Hydro, Speedmatch, Loadmatch, Auto Style cruise, R4 Loaded, DSCV & Single rear, Poser Beyond, 55 amp alt, 2 Front lights w/ brush gaurds, Rear lights w/ brush guard, Mid PTO, I-Match, Telescoping Draft links, 48 Backhoe w/ 12" & 36" bucket, 430 Loader w/ 4-in-1 with FCC toothbar, Bucket level indicator, Hood Guard, MX5, Frontier landscape rake and Frontier Box Blade.

Should be here at 9:00 Friday morning! /forums/images/graemlins/grin.gif
 

Tractor & Equipment Auctions

2010 International 4400 National Crane 300C Crane Truck (A50323)
2010 International...
2025 8ft Office Shipping Container (A49346)
2025 8ft Office...
2018 Dodge Charger Sedan (A50324)
2018 Dodge Charger...
2009 HINO 185 18FT BOX TRUCK (A51219)
2009 HINO 185 18FT...
UNUSED INDUSTRIAS AMERICA F08 - 8' LAND LEVELER (A50459)
UNUSED INDUSTRIAS...
10 Ft Fork extensions (A50322)
10 Ft Fork...
 
Top