toothbar, pin on teeth, Need help!!!

   / toothbar, pin on teeth, Need help!!!
  • Thread Starter
#11  
final pic
 

Attachments

  • 632282-P4211601.JPG
    632282-P4211601.JPG
    88 KB · Views: 276
   / toothbar, pin on teeth, Need help!!! #12  
I can echo the comments.

Used fabco series 23 also.

Had to compress the pins with vice grips and pounded them in.
I doubt they will ever fall off.

As to digging, WOW! I was able to pry out rocks too big to fit my FEL bucket in mt driveway.
Matter of fact they were heavy enough to create the 'pucker syndrome' when the rear kinda left the ground.
I resorted to push/roll them aside.

Being spring thaw I wanted to get rid of the pesty frost heaved imbedded rocks.
The soil is a clay based subsoil that is hard as concrete when dry. In the present wet condition they came out easily, but otherwise it would have required a full sized backhoe at least.

Also tried some old stumps in the 6" variety. Piece of cake.

Loading full buckets of soil with imbedded stones was awsome.
Without teeth the cutting edge would simply deflect off of even a 4" stone rendering a bucketfull near impossible.
Now I get full loads every time.
 

Tractor & Equipment Auctions

Grady-White 17ft Fishing Boat with T/A Boat Trailer (A50324)
Grady-White 17ft...
IH Farmall 504 Tractor (A50514)
IH Farmall 504...
1997 INTERNATIONAL 8100 4X2 WATER TRUCK (A50458)
1997 INTERNATIONAL...
Miles,26,126 (A50323)
Miles,26,126 (A50323)
2018 Ford Explorer AWD SUV (A50324)
2018 Ford Explorer...
2018 INTERNATIONAL LT625 TANDEM AXLE SLEEPER (A52141)
2018 INTERNATIONAL...
 
Top