Forks TPH Pallet Forks

[rationalizer]

Richard,

Sounds like you had a high pressure job to handle! I am discussing delivery with my stone supplier now. I am hoping that he will be able to deliver the pallets "onto the ground". I'm not too keen on trying to unload a flatbed with my 4710. Your system sounds a bit to "precarious" my comfort level. The 4710 is a "big" compact - but it is still a compact! If I needed to I might even rent a forklift for a half day. /forums/images/graemlins/grin.gif

Bill

 

[johnnyk]

Here's a 1200 Lb. rated pallet fork from ABC Groff. They also sell a heavier unit with solid forks instead of 2”x4” tubes. It takes a little adapting to fix on my BX22, but a larger Cat. 1 should be no problem. I plan to build a 4'x4' "carry-all" to fit on the forks and use it for yard work.

 

[DDT]

That pic looks like a 3 point bale fork, but it would work as long as the with is OK.

 

[Anonymous Poster]

Hi Bill--We occasionally use a 3 point round hay bale fork to do jobs similar to what you are describing--The lift capacity is usually around 2000 lb and the prices usually run under $250 New--Ken Sweet
Sweet Farm Equipment Co.
<font color="blue">http://www.sweettractors.com </font>

 

[Anonymous Poster]

</font><font color="blue" class="small">( Hi Bill--We occasionally use a 3 point round hay bale fork to do jobs similar to what you are describing--The lift capacity is usually around 2000 lb and the prices usually run under $250 New--Ken Sweet )</font>

You can see one here

Bill in Pgh, PA

 

[Anonymous Poster]

I found this at a farm auction. Mostly Orchard equment. now I have the best of both worlds(front or back).

 

[rationalizer]

Do you know who manufactured those forks?

Bill

 

[Anonymous Poster]

Rear's Manufacturing
2140 Prairie Rd EUGENE, OR 97402-9738

(541) 688-1002
Contact: Mike Rear
I have no idea what they cost new about $75 to $100 at action

 

[rationalizer]

Thanks - I'll give them a call.

Bill