Tracks for chinese dozer.

[bobgebroski]

Would anyone happen to know the correct size rubber tracks to fit on Yuchai / East Wind yct306 dozer. Thanks.

 

[Bob Rooks]

Did the machine previously have rubber tracks, or are you converting to rubber?

 

[bobgebroski]

Wanting to convert to rubber.

 

[Bob Rooks]

Wanting to convert to rubber.

You will need to add a lower track roller, for a total of six bottom rollers on each side.
The part number for the rubber track is 302-6.34.051R.

 

[bobgebroski]

Thank you sir.

 

[bobgebroski]

When I try to look it up I am not able to find any thing with this part #. I will probably have to look at Brismac or the like that sells the tractors to get this parts #. I was hoping for the dimensions so I could find a set from any rubber track supplier.

 

[Bob Rooks]

I should have noted that the track frames are already drilled and threaded for the sixth roller.
I will try to get the numbers from my tracks today, but I kinda doubt any aftermarket track profile is going to fit. You should be able to order OEM tracks through Northern Tool or Circle-G Tractor.
You didn't fill out your profile location so I didn't know you're in AUSTRALIA! Yes, order through Brismac!

 

[bobgebroski]

Ok thanks for the info. I'm in the US. Will give Northern tool or Circle-G a call.

 

[Bob Rooks]

Ok thanks for the info. I'm in the US. Will give Northern tool or Circle-G a call.

Good, let us know what you find out.

 

[bobgebroski]

Will do.