Started making the bucket...got the sheets back from bending shop...they made a mistake, wrong upper angle but I will cover this with a little triangle and it will be fine. Originaly it should have followed side plate shape...
Tractor backhoe - homemade
- Thread starter BFreaky
- Start date
- Views: 1143993
mickeyw
Bronze Member
- Joined
- Dec 10, 2012
- Messages
- 64
- Location
- Surrey, UK
- Tractor
- 1987 Renault 68-12, 1981 JD1640, 1973 Ford 3000
That looks fantastic. How thick are the sides?
Kyle_in_Tex
Super Star Member
Looks good. Our Deere's FEL bucket has roughly 10mm x 100mm wide reinforcement under the bucket in line with the couplings. It goes all the way underneath to the cutting edge.
Ryansweatt2004
Gold Member
I’ve really enjoyed following this whole thread! Keep up the great work and keep posting updates!
Gale Hawkins
Super Star Member
- Joined
- Sep 20, 2009
- Messages
- 12,426
- Location
- Murray, KY
- Tractor
- 1948 Allis Chambers Model B 1976 265 MF / 1983 JD 310B Backhoe / 1966 Ford 3000 Diesel / 1980 3600 Diesel
Some turning and welding...
WOW! that is shaping up to be a nice FEL. You may have mentioned earlier about the bucket and or forks. Are you going to build them from scratch also?
texasranger556
Platinum Member
I keep expecting to check this thread to find that you've started building your own tractor from scratch. The backhoe and loader are going outclass the tractor.
Gale Hawkins
Super Star Member
- Joined
- Sep 20, 2009
- Messages
- 12,426
- Location
- Murray, KY
- Tractor
- 1948 Allis Chambers Model B 1976 265 MF / 1983 JD 310B Backhoe / 1966 Ford 3000 Diesel / 1980 3600 Diesel
The bucket is almost done and I made the forks earlyer.
Awesome work.
