Tractor manuals?

   / Tractor manuals? #11  
I supply manuals for Japanse tractors. For some models they are almost identical, for others they aren't real close , but they are the closest you can get in English. Stay away from the zero hours/"reconditioned models" . I can tell you some real horror stories about them.
 
   / Tractor manuals?
  • Thread Starter
#12  
Thanks for the reply Lenord. I have decided to stay away from the "reconditioned" tractors like you suggest. I saw the photos of their shop! I think I would much rather buy one that hasn't been taken apart and then put back together again in those conditions. I live in Az but will be going through St. Louis and Springfield this next week. Do you sell gray tractors and will I be going past your dealership? Maybe I could stop in.
Thanks
Michael
 
   / Tractor manuals? #13  
For starters, "Glucosamine and Chondroitin" does wonders for your arthritis. If you haven't tried it you will feel like a new man after a couple of months. If you go the Yanmar route, those newer gray markets, F or FXxx, are nice, however since they don't have a US equivalent, and that's all Yanmar is supporting these days, you may find parts getting a little scarce. Lastly, don't feel as if you need to answer each and every response on any of these froums. It ain't necessary or expected.
 
   / Tractor manuals? #14  
I just bought a gray market Kubota & I haven't had any problems yeat.It's a L1500DT 4X4 an it's done everything I have wanted,only have a box blade& a finish mower.But I have pulled quite-a-few trees,& done very good,I love it for the price,I only have 2 acers of land to mow with it,onece its all cleared.Good luck on your decision. /forums/images/graemlins/laugh.gif
 
   / Tractor manuals? #15  
Mike I feel for you also about arthritis and getting on and off. I'm a small dealer and sell many of the 'B' MODEL tractor for this reason. They are listed As YM2000B and etc. Not all the models have a "B" model. But one of the more popular models is the 2000 series. I just sold a YM2000BD with loader and a YM2210BD. Nice machine and the operator plateform is larger making it easier to get on and off. Nice Instrument panel and side panels on the engine. They are only about $200 more than the regular models. Hope this helps you make a decission. I'm in Al and can't help you much.
 

Tractor & Equipment Auctions

UNUSED CHERY INDUSTRIAL SINGLE GARAGE METAL SHED (A51248)
UNUSED CHERY...
2021 ONYX RX34 ELECTRIC SWEEPER (A51406)
2021 ONYX RX34...
(10) 24' CORRAL PANELS (A51247)
(10) 24' CORRAL...
2009 Lincoln MKS Sedan (A51694)
2009 Lincoln MKS...
2018 Ford Transit 250 Cargo Van (A51692)
2018 Ford Transit...
(4) STEEL CARTS W/ WHEELS (A51248)
(4) STEEL CARTS W/...
 
Top