Tractor manuals?

   / Tractor manuals? #11  
I supply manuals for Japanse tractors. For some models they are almost identical, for others they aren't real close , but they are the closest you can get in English. Stay away from the zero hours/"reconditioned models" . I can tell you some real horror stories about them.
 
   / Tractor manuals?
  • Thread Starter
#12  
Thanks for the reply Lenord. I have decided to stay away from the "reconditioned" tractors like you suggest. I saw the photos of their shop! I think I would much rather buy one that hasn't been taken apart and then put back together again in those conditions. I live in Az but will be going through St. Louis and Springfield this next week. Do you sell gray tractors and will I be going past your dealership? Maybe I could stop in.
Thanks
Michael
 
   / Tractor manuals? #13  
For starters, "Glucosamine and Chondroitin" does wonders for your arthritis. If you haven't tried it you will feel like a new man after a couple of months. If you go the Yanmar route, those newer gray markets, F or FXxx, are nice, however since they don't have a US equivalent, and that's all Yanmar is supporting these days, you may find parts getting a little scarce. Lastly, don't feel as if you need to answer each and every response on any of these froums. It ain't necessary or expected.
 
   / Tractor manuals? #14  
I just bought a gray market Kubota & I haven't had any problems yeat.It's a L1500DT 4X4 an it's done everything I have wanted,only have a box blade& a finish mower.But I have pulled quite-a-few trees,& done very good,I love it for the price,I only have 2 acers of land to mow with it,onece its all cleared.Good luck on your decision. /forums/images/graemlins/laugh.gif
 
   / Tractor manuals? #15  
Mike I feel for you also about arthritis and getting on and off. I'm a small dealer and sell many of the 'B' MODEL tractor for this reason. They are listed As YM2000B and etc. Not all the models have a "B" model. But one of the more popular models is the 2000 series. I just sold a YM2000BD with loader and a YM2210BD. Nice machine and the operator plateform is larger making it easier to get on and off. Nice Instrument panel and side panels on the engine. They are only about $200 more than the regular models. Hope this helps you make a decission. I'm in Al and can't help you much.
 

Tractor & Equipment Auctions

2006 CATERPILLAR 312CL EXCAVATOR (A51406)
2006 CATERPILLAR...
Hydraulic 50 mm Thumb, NEW never installed (A52384)
Hydraulic 50 mm...
(2) 12-16.5 TIRES & WHEELS (A51248)
(2) 12-16.5 TIRES...
UNUSED JCT HYD TRENCHER (A51248)
UNUSED JCT HYD...
2024 TOFT 1550 Hydraulic Breaker (A53117)
2024 TOFT 1550...
CUSHMAN HAULER PRO GAS GOLF CART (A51406)
CUSHMAN HAULER PRO...
 
Top