rambler
Veteran Member
- Joined
- Jul 6, 2003
- Messages
- 1,996
- Location
- MN
- Tractor
- Ford 960, 7700, TW20, 1720; IHC H, 300; Ollie S77
For my farming work, the big tractors run at pto speed to top operating rpm for most of the day, 8-12 hours straight. That's the most efficient, and you describe it pretty well.
For utility work, and that is what most of these compacts do, it varies a whole lot. It depends more on the job, what speed I want to travel, what speed the hydraulics or pto should go, etc. Basically, these CUT tractors are rarely used as a full pull brute, but rather as a niffty tool. Same rules don't apply.
--->Paul
For utility work, and that is what most of these compacts do, it varies a whole lot. It depends more on the job, what speed I want to travel, what speed the hydraulics or pto should go, etc. Basically, these CUT tractors are rarely used as a full pull brute, but rather as a niffty tool. Same rules don't apply.
--->Paul