timster2
Platinum Member
Getting ready to make some lumber. Need to make a shed for the new mill.
![IMG_1895[1].JPG](https://www.tractorbynet.com/forums/data/attachments/426/426622-a41288559991feb4ba33af551131b1c5.jpg "IMG_1895[1].JPG")
Tractors and wood! Show your pics
- Thread starter Bota4me
- Start date
- Views: 4644598
motownbrowne
Elite Member
- Joined
- Dec 30, 2013
- Messages
- 2,613
- Location
- river falls, wi
- Tractor
- Kubota mx4700 HST, New Holland TC-29D
EONE
Member
BIG wood,VS BIG saw...and three small machines.... The saw and machines won!....
I took down a big Poplar trunk in a friends backyard during the last couple weekends. Tree was topped a couple years ago over a dispute about a limb falling over on his neighbors lawn..... I wanted the big tree and did the job. Tree was 5'3 diameter on the butt and never lost more than a foot or so up to 50 feet. I used a Stihl MS-880 Magnum with a 50" Cannon Superbar for falling and bucking and an MS-461 with a 28" bar for cleaning up the notch and trimming.
It took my Boomer 41, New Holland E27B mini-ex, and 40C John Deere crawler to get the two main logs up the steep bank. They weigh 5-6 tons each. The tree was solid all the way through. It was quite a project. Pics
I took down a big Poplar trunk in a friends backyard during the last couple weekends. Tree was topped a couple years ago over a dispute about a limb falling over on his neighbors lawn..... I wanted the big tree and did the job. Tree was 5'3 diameter on the butt and never lost more than a foot or so up to 50 feet. I used a Stihl MS-880 Magnum with a 50" Cannon Superbar for falling and bucking and an MS-461 with a 28" bar for cleaning up the notch and trimming.
It took my Boomer 41, New Holland E27B mini-ex, and 40C John Deere crawler to get the two main logs up the steep bank. They weigh 5-6 tons each. The tree was solid all the way through. It was quite a project. Pics
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 63,317
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Wow! That's a big tree! :thumbsup:
What became of the wood?
What became of the wood?
Creamer
Elite Member
Congrats on a job well done!
rswyan
Super Star Member
- Joined
- May 12, 2004
- Messages
- 12,186
- Location
- Northeast Ohio
- Tractor
- Kubota B2910, Cub Cadet Pro Z 154S, Simplicity 18 CFC, Cub Cadet 782
Got another hour or so in yesterday evening, pile continues to grow bit by bit:
Splitter was working on this one, trying to shear through the knot ... but it eventually did it.
I managed to smash the tips of a couple of fingers on my left hand when the round the above split came out of rolled and caught my hand between it and the cradle. Hurt like $%#@ ... but I think I'll keep the fingernails.
Splitter was working on this one, trying to shear through the knot ... but it eventually did it.
I managed to smash the tips of a couple of fingers on my left hand when the round the above split came out of rolled and caught my hand between it and the cradle. Hurt like $%#@ ... but I think I'll keep the fingernails.
farmer2009
Elite Member
Wait. New mill. We need specs. Looks nice.
ProjectKing
Platinum Member
- Joined
- Sep 16, 2015
- Messages
- 823
- Location
- USA
- Tractor
- Kubota L3830 FEL, Kubota L3301 FEL/BH, Ford Golden Jubilee, Honda Foreman 450ES, Polaris Ranger 400, Kubota ZD326, etc, etc
timster2
Platinum Member
The mill is a Woodland Mills HM130. I didn't want to waste all the logs left behind by the power companies power line project.
Most of the hardwoods were sold off to a local mill, however, the smaller logs, Hemlock, Beech and White pine were left behind. Seemed a shame to waste all the logs so I got the mill and plan to expand my garage and build a few sheds.
Most of the hardwoods were sold off to a local mill, however, the smaller logs, Hemlock, Beech and White pine were left behind. Seemed a shame to waste all the logs so I got the mill and plan to expand my garage and build a few sheds.
